Add MKS Base 1.6 board (#16783)

This commit is contained in:
thisiskeithb 2020-02-04 21:21:05 -08:00 committed by GitHub
parent 0ebd2f44d4
commit 9b4192cdd0
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
7 changed files with 149 additions and 85 deletions

View File

@ -180,88 +180,93 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1105)
else ifeq ($(HARDWARE_MOTHERBOARD),1106)
# MKS v1.5 with Allegro A4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1107)
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
# MKS v1.6 with Allegro A4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1108)
# MKS GEN v1.3 or 1.4
# MKS BASE 1.0 with Heroic HR4982 stepper drivers
else ifeq ($(HARDWARE_MOTHERBOARD),1109)
# MKS GEN L
# MKS GEN v1.3 or 1.4
else ifeq ($(HARDWARE_MOTHERBOARD),1110)
# zrib V2.0 control board (Chinese knock off RAMPS replica)
# MKS GEN L
else ifeq ($(HARDWARE_MOTHERBOARD),1111)
# BigTreeTech or BIQU KFB2.0
# zrib V2.0 control board (Chinese knock off RAMPS replica)
else ifeq ($(HARDWARE_MOTHERBOARD),1112)
# Felix 2.0+ Electronics Board (RAMPS like)
# BigTreeTech or BIQU KFB2.0
else ifeq ($(HARDWARE_MOTHERBOARD),1113)
# Invent-A-Part RigidBoard
# Felix 2.0+ Electronics Board (RAMPS like)
else ifeq ($(HARDWARE_MOTHERBOARD),1114)
# Invent-A-Part RigidBoard V2
# Invent-A-Part RigidBoard
else ifeq ($(HARDWARE_MOTHERBOARD),1115)
# Sainsmart 2-in-1 board
# Invent-A-Part RigidBoard V2
else ifeq ($(HARDWARE_MOTHERBOARD),1116)
# Ultimaker
# Sainsmart 2-in-1 board
else ifeq ($(HARDWARE_MOTHERBOARD),1117)
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
# Ultimaker
else ifeq ($(HARDWARE_MOTHERBOARD),1118)
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
else ifeq ($(HARDWARE_MOTHERBOARD),1119)
MCU ?= atmega1280
# Azteeg X3
else ifeq ($(HARDWARE_MOTHERBOARD),1119)
# Azteeg X3 Pro
else ifeq ($(HARDWARE_MOTHERBOARD),1120)
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
# Azteeg X3 Pro
else ifeq ($(HARDWARE_MOTHERBOARD),1121)
# Rumba
# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
else ifeq ($(HARDWARE_MOTHERBOARD),1122)
# Raise3D Rumba
# Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),1123)
# Rapide Lite RL200 Rumba
# Raise3D Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),1124)
# Formbot T-Rex 2 Plus
# Rapide Lite RL200 Rumba
else ifeq ($(HARDWARE_MOTHERBOARD),1125)
# Formbot T-Rex 3
# Formbot T-Rex 2 Plus
else ifeq ($(HARDWARE_MOTHERBOARD),1126)
# Formbot Raptor
# Formbot T-Rex 3
else ifeq ($(HARDWARE_MOTHERBOARD),1127)
# Formbot Raptor 2
# Formbot Raptor
else ifeq ($(HARDWARE_MOTHERBOARD),1128)
# bq ZUM Mega 3D
# Formbot Raptor 2
else ifeq ($(HARDWARE_MOTHERBOARD),1129)
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
# bq ZUM Mega 3D
else ifeq ($(HARDWARE_MOTHERBOARD),1130)
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
else ifeq ($(HARDWARE_MOTHERBOARD),1131)
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
# TriGorilla Anycubic version 1.3 based on RAMPS EFB
else ifeq ($(HARDWARE_MOTHERBOARD),1132)
# TriGorilla Anycubic version 1.4 Rev 1.1
# TriGorilla Anycubic version 1.4 based on RAMPS EFB
else ifeq ($(HARDWARE_MOTHERBOARD),1133)
# Creality: Ender-4, CR-8
# TriGorilla Anycubic version 1.4 Rev 1.1
else ifeq ($(HARDWARE_MOTHERBOARD),1134)
# Creality: CR10S, CR20, CR-X
# Creality: Ender-4, CR-8
else ifeq ($(HARDWARE_MOTHERBOARD),1135)
# Dagoma F5
# Creality: CR10S, CR20, CR-X
else ifeq ($(HARDWARE_MOTHERBOARD),1136)
# FYSETC F6
# Dagoma F5
else ifeq ($(HARDWARE_MOTHERBOARD),1137)
# Duplicator i3 Plus
# FYSETC F6 1.3
else ifeq ($(HARDWARE_MOTHERBOARD),1138)
# VORON
# FYSETC F6 1.5
else ifeq ($(HARDWARE_MOTHERBOARD),1139)
# TRONXY V3 1.0
# Duplicator i3 Plus
else ifeq ($(HARDWARE_MOTHERBOARD),1140)
# Z-Bolt X Series
# VORON
else ifeq ($(HARDWARE_MOTHERBOARD),1141)
# TT OSCAR
# TRONXY V3 1.0
else ifeq ($(HARDWARE_MOTHERBOARD),1142)
# Overlord/Overlord Pro
# Z-Bolt X Series
else ifeq ($(HARDWARE_MOTHERBOARD),1143)
# ADIMLab Gantry v1
# TT OSCAR
else ifeq ($(HARDWARE_MOTHERBOARD),1144)
# ADIMLab Gantry v2
# Overlord/Overlord Pro
else ifeq ($(HARDWARE_MOTHERBOARD),1145)
# BIQU Tango V1
# ADIMLab Gantry v1
else ifeq ($(HARDWARE_MOTHERBOARD),1146)
# MKS GEN L V2
# ADIMLab Gantry v2
else ifeq ($(HARDWARE_MOTHERBOARD),1147)
# BIQU Tango V1
else ifeq ($(HARDWARE_MOTHERBOARD),1148)
# MKS GEN L V2
else ifeq ($(HARDWARE_MOTHERBOARD),1149)
#
# RAMBo and derivatives

View File

@ -59,49 +59,50 @@
#define BOARD_BAM_DICE 1103 // 2PrintBeta BAM&DICE with STK drivers
#define BOARD_BAM_DICE_DUE 1104 // 2PrintBeta BAM&DICE Due with STK drivers
#define BOARD_MKS_BASE 1105 // MKS BASE v1.0
#define BOARD_MKS_BASE_14 1106 // MKS v1.4 with A4982 stepper drivers
#define BOARD_MKS_BASE_15 1107 // MKS v1.5 with Allegro A4982 stepper drivers
#define BOARD_MKS_BASE_HEROIC 1108 // MKS BASE 1.0 with Heroic HR4982 stepper drivers
#define BOARD_MKS_GEN_13 1109 // MKS GEN v1.3 or 1.4
#define BOARD_MKS_GEN_L 1110 // MKS GEN L
#define BOARD_KFB_2 1111 // BigTreeTech or BIQU KFB2.0
#define BOARD_ZRIB_V20 1112 // zrib V2.0 control board (Chinese knock off RAMPS replica)
#define BOARD_FELIX2 1113 // Felix 2.0+ Electronics Board (RAMPS like)
#define BOARD_RIGIDBOARD 1114 // Invent-A-Part RigidBoard
#define BOARD_RIGIDBOARD_V2 1115 // Invent-A-Part RigidBoard V2
#define BOARD_SAINSMART_2IN1 1116 // Sainsmart 2-in-1 board
#define BOARD_ULTIMAKER 1117 // Ultimaker
#define BOARD_ULTIMAKER_OLD 1118 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
#define BOARD_AZTEEG_X3 1119 // Azteeg X3
#define BOARD_AZTEEG_X3_PRO 1120 // Azteeg X3 Pro
#define BOARD_ULTIMAIN_2 1121 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
#define BOARD_RUMBA 1122 // Rumba
#define BOARD_RUMBA_RAISE3D 1123 // Raise3D N series Rumba derivative
#define BOARD_RL200 1124 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
#define BOARD_FORMBOT_TREX2PLUS 1125 // Formbot T-Rex 2 Plus
#define BOARD_FORMBOT_TREX3 1126 // Formbot T-Rex 3
#define BOARD_FORMBOT_RAPTOR 1127 // Formbot Raptor
#define BOARD_FORMBOT_RAPTOR2 1128 // Formbot Raptor 2
#define BOARD_BQ_ZUM_MEGA_3D 1129 // bq ZUM Mega 3D
#define BOARD_MAKEBOARD_MINI 1130 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
#define BOARD_TRIGORILLA_13 1131 // TriGorilla Anycubic version 1.3-based on RAMPS EFB
#define BOARD_TRIGORILLA_14 1132 // ... Ver 1.4
#define BOARD_TRIGORILLA_14_11 1133 // ... Rev 1.1 (new servo pin order)
#define BOARD_RAMPS_ENDER_4 1134 // Creality: Ender-4, CR-8
#define BOARD_RAMPS_CREALITY 1135 // Creality: CR10S, CR20, CR-X
#define BOARD_RAMPS_DAGOMA 1136 // Dagoma F5
#define BOARD_FYSETC_F6_13 1137 // FYSETC F6 1.3
#define BOARD_FYSETC_F6_14 1138 // FYSETC F6 1.4
#define BOARD_DUPLICATOR_I3_PLUS 1139 // Wanhao Duplicator i3 Plus
#define BOARD_VORON 1140 // VORON Design
#define BOARD_TRONXY_V3_1_0 1141 // Tronxy TRONXY-V3-1.0
#define BOARD_Z_BOLT_X_SERIES 1142 // Z-Bolt X Series
#define BOARD_TT_OSCAR 1143 // TT OSCAR
#define BOARD_OVERLORD 1144 // Overlord/Overlord Pro
#define BOARD_HJC2560C_REV1 1145 // ADIMLab Gantry v1
#define BOARD_HJC2560C_REV2 1146 // ADIMLab Gantry v2
#define BOARD_TANGO 1147 // BIQU Tango V1
#define BOARD_MKS_GEN_L_V2 1148 // MKS GEN L V2
#define BOARD_MKS_BASE_14 1106 // MKS BASE v1.4 with Allegro A4982 stepper drivers
#define BOARD_MKS_BASE_15 1107 // MKS BASE v1.5 with Allegro A4982 stepper drivers
#define BOARD_MKS_BASE_16 1108 // MKS BASE v1.6 with Allegro A4982 stepper drivers
#define BOARD_MKS_BASE_HEROIC 1109 // MKS BASE 1.0 with Heroic HR4982 stepper drivers
#define BOARD_MKS_GEN_13 1110 // MKS GEN v1.3 or 1.4
#define BOARD_MKS_GEN_L 1111 // MKS GEN L
#define BOARD_KFB_2 1112 // BigTreeTech or BIQU KFB2.0
#define BOARD_ZRIB_V20 1113 // zrib V2.0 control board (Chinese knock off RAMPS replica)
#define BOARD_FELIX2 1114 // Felix 2.0+ Electronics Board (RAMPS like)
#define BOARD_RIGIDBOARD 1115 // Invent-A-Part RigidBoard
#define BOARD_RIGIDBOARD_V2 1116 // Invent-A-Part RigidBoard V2
#define BOARD_SAINSMART_2IN1 1117 // Sainsmart 2-in-1 board
#define BOARD_ULTIMAKER 1118 // Ultimaker
#define BOARD_ULTIMAKER_OLD 1119 // Ultimaker (Older electronics. Pre 1.5.4. This is rare)
#define BOARD_AZTEEG_X3 1120 // Azteeg X3
#define BOARD_AZTEEG_X3_PRO 1121 // Azteeg X3 Pro
#define BOARD_ULTIMAIN_2 1122 // Ultimainboard 2.x (Uses TEMP_SENSOR 20)
#define BOARD_RUMBA 1123 // Rumba
#define BOARD_RUMBA_RAISE3D 1124 // Raise3D N series Rumba derivative
#define BOARD_RL200 1125 // Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
#define BOARD_FORMBOT_TREX2PLUS 1126 // Formbot T-Rex 2 Plus
#define BOARD_FORMBOT_TREX3 1127 // Formbot T-Rex 3
#define BOARD_FORMBOT_RAPTOR 1128 // Formbot Raptor
#define BOARD_FORMBOT_RAPTOR2 1129 // Formbot Raptor 2
#define BOARD_BQ_ZUM_MEGA_3D 1130 // bq ZUM Mega 3D
#define BOARD_MAKEBOARD_MINI 1131 // MakeBoard Mini v2.1.2 is a control board sold by MicroMake
#define BOARD_TRIGORILLA_13 1132 // TriGorilla Anycubic version 1.3-based on RAMPS EFB
#define BOARD_TRIGORILLA_14 1133 // ... Ver 1.4
#define BOARD_TRIGORILLA_14_11 1134 // ... Rev 1.1 (new servo pin order)
#define BOARD_RAMPS_ENDER_4 1135 // Creality: Ender-4, CR-8
#define BOARD_RAMPS_CREALITY 1136 // Creality: CR10S, CR20, CR-X
#define BOARD_RAMPS_DAGOMA 1137 // Dagoma F5
#define BOARD_FYSETC_F6_13 1138 // FYSETC F6 1.3
#define BOARD_FYSETC_F6_14 1139 // FYSETC F6 1.4
#define BOARD_DUPLICATOR_I3_PLUS 1140 // Wanhao Duplicator i3 Plus
#define BOARD_VORON 1141 // VORON Design
#define BOARD_TRONXY_V3_1_0 1142 // Tronxy TRONXY-V3-1.0
#define BOARD_Z_BOLT_X_SERIES 1143 // Z-Bolt X Series
#define BOARD_TT_OSCAR 1144 // TT OSCAR
#define BOARD_OVERLORD 1145 // Overlord/Overlord Pro
#define BOARD_HJC2560C_REV1 1146 // ADIMLab Gantry v1
#define BOARD_HJC2560C_REV2 1147 // ADIMLab Gantry v2
#define BOARD_TANGO 1148 // BIQU Tango V1
#define BOARD_MKS_GEN_L_V2 1149 // MKS GEN L V2
//
// RAMBo and derivatives

View File

@ -110,6 +110,8 @@
#include "ramps/pins_MKS_BASE_14.h" // ATmega2560 env:megaatmega2560
#elif MB(MKS_BASE_15)
#include "ramps/pins_MKS_BASE_15.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MKS_BASE_16)
#include "ramps/pins_MKS_BASE_16.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MKS_BASE_HEROIC)
#include "ramps/pins_MKS_BASE_HEROIC.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MKS_GEN_13)

View File

@ -31,7 +31,9 @@
#error "MKS BASE 1.0 supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#ifndef BOARD_INFO_NAME
#define BOARD_INFO_NAME "MKS BASE 1.0"
#endif
//
// Heaters / Fans

View File

@ -22,7 +22,7 @@
#pragma once
/**
* MKS BASE v1.4
* MKS BASE v1.4 with A4982 stepper drivers and digital micro-stepping
*/
#if HOTENDS > 2 || E_STEPPERS > 2

View File

@ -25,6 +25,12 @@
* MKS BASE v1.5 with A4982 stepper drivers and digital micro-stepping
*/
#if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS BASE 1.5 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "MKS BASE 1.5"
#include "pins_MKS_BASE.h"
/**

View File

@ -0,0 +1,48 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* MKS BASE v1.6 with A4982 stepper drivers and digital micro-stepping
*/
#if HOTENDS > 2 || E_STEPPERS > 2
#error "MKS BASE 1.6 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
#endif
#define BOARD_INFO_NAME "MKS BASE 1.6"
#include "pins_MKS_BASE.h"
/**
* Microstepping pins
*/
#define X_MS1_PIN 5 // Digital 3 / Pin 5 / PE3 / SERVO2_PIN
#define X_MS2_PIN 6 // Digital 6 / Pin 14 / PH3 / SERVO1_PIN
#define Y_MS1_PIN 59 // Analog 5 / Pin 92 / PF5
#define Y_MS2_PIN 58 // Analog 4 / Pin 93 / PF4
#define Z_MS1_PIN 22 // Digital 22 / Pin 78 / PA0
#define Z_MS2_PIN 39 // Digital 39 / Pin 70 / PG2
#define E0_MS1_PIN 63 // Analog 9 / Pin 86 / PK1
#define E0_MS2_PIN 64 // Analog 10 / Pin 87 / PK2
#define E1_MS1_PIN 57 // Analog 3 / Pin 93 / PF3
#define E1_MS2_PIN 4 // Digital 4 / Pin 1 / PG5 / SERVO3_PIN