218 lines
7.5 KiB
C
218 lines
7.5 KiB
C
/**
|
|
* Marlin 3D Printer Firmware
|
|
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
|
*
|
|
* Based on Sprinter and grbl.
|
|
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
|
|
*
|
|
* This program is free software: you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation, either version 3 of the License, or
|
|
* (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program. If not, see <https://www.gnu.org/licenses/>.
|
|
*
|
|
*/
|
|
#pragma once
|
|
|
|
/**
|
|
* MKS Robin (STM32F130ZET6) board pin assignments
|
|
*
|
|
* https://github.com/makerbase-mks/MKS-Robin/tree/master/MKS%20Robin/Hardware
|
|
*/
|
|
|
|
#if !defined(STM32F1) && !defined(STM32F1xx)
|
|
#error "Oops! Select an STM32F1 board in 'Tools > Board.'"
|
|
#elif HOTENDS > 2 || E_STEPPERS > 2
|
|
#error "MKS Robin supports up to 2 hotends / E-steppers. Comment out this line to continue."
|
|
#endif
|
|
|
|
#define BOARD_INFO_NAME "MKS Robin"
|
|
|
|
//
|
|
// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
|
|
//
|
|
#define DISABLE_JTAG
|
|
|
|
//
|
|
// Enable SD EEPROM to prevent infinite boot loop
|
|
//
|
|
#ifdef ARDUINO_ARCH_STM32
|
|
#define FLASH_EEPROM_EMULATION
|
|
#define EEPROM_PAGE_SIZE (0x800U) // 2KB
|
|
#define EEPROM_START_ADDRESS (0x8000000UL + (STM32_FLASH_SIZE) * 1024UL - (EEPROM_PAGE_SIZE) * 2UL)
|
|
#define MARLIN_EEPROM_SIZE (EEPROM_PAGE_SIZE)
|
|
#else
|
|
#define SDCARD_EEPROM_EMULATION
|
|
#endif
|
|
|
|
//
|
|
// Servos
|
|
//
|
|
#define SERVO0_PIN PC3 // XS1 - 5
|
|
#define SERVO1_PIN PA1 // XS1 - 6
|
|
#define SERVO2_PIN PF9 // XS2 - 5
|
|
#define SERVO3_PIN PF8 // XS2 - 6
|
|
|
|
//
|
|
// Limit Switches
|
|
//
|
|
#define X_MIN_PIN PB12
|
|
#define X_MAX_PIN PB0
|
|
#define Y_MIN_PIN PC5
|
|
#define Y_MAX_PIN PC4
|
|
#define Z_MIN_PIN PA4
|
|
#define Z_MAX_PIN PF7
|
|
|
|
//
|
|
// Steppers
|
|
//
|
|
#define X_ENABLE_PIN PB9
|
|
#define X_STEP_PIN PB8
|
|
#define X_DIR_PIN PB5
|
|
|
|
#define Y_ENABLE_PIN PB4
|
|
#define Y_STEP_PIN PG15
|
|
#define Y_DIR_PIN PG10
|
|
|
|
#define Z_ENABLE_PIN PD7
|
|
#define Z_STEP_PIN PD3
|
|
#define Z_DIR_PIN PG14
|
|
|
|
#define E0_ENABLE_PIN PG13
|
|
#define E0_STEP_PIN PG8
|
|
#define E0_DIR_PIN PA15
|
|
|
|
#define E1_ENABLE_PIN PA12
|
|
#define E1_STEP_PIN PA11
|
|
#define E1_DIR_PIN PA8
|
|
|
|
//
|
|
// Temperature Sensors
|
|
//
|
|
#define TEMP_0_PIN PC1 // TH1
|
|
#define TEMP_1_PIN PC2 // TH2
|
|
#define TEMP_BED_PIN PC0 // TB1
|
|
|
|
//
|
|
// Heaters / Fans
|
|
//
|
|
#define HEATER_0_PIN PC7 // HEATER1
|
|
#define HEATER_1_PIN PA6 // HEATER2
|
|
#define HEATER_BED_PIN PC6 // HOT BED
|
|
|
|
#define FAN_PIN PA7 // FAN
|
|
|
|
/**
|
|
* Note: MKS Robin board is using SPI2 interface. Make sure your stm32duino library is configured accordingly
|
|
*/
|
|
//#define MAX6675_SS_PIN PE5 // TC1 - CS1
|
|
//#define MAX6675_SS_PIN PE6 // TC2 - CS2
|
|
|
|
#define POWER_LOSS_PIN PA2 // PW_DET
|
|
#define PS_ON_PIN PA3 // PW_OFF
|
|
#define FIL_RUNOUT_PIN PF11 // MT_DET
|
|
|
|
#ifdef ARDUINO_ARCH_STM32F1
|
|
#define BEEPER_PIN PC13
|
|
#else
|
|
#define BEEPER_PIN -1
|
|
#endif
|
|
#define LED_PIN PB2
|
|
|
|
#ifdef HAS_GRAPHICAL_TFT
|
|
#define TFT_RESET_PIN PF6
|
|
#define TFT_BACKLIGHT_PIN PG11
|
|
#define TFT_CS_PIN PG12 // NE4
|
|
#define TFT_RS_PIN PF0 // A0
|
|
#else
|
|
/**
|
|
* Note: MKS Robin TFT screens use various TFT controllers
|
|
* Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240)
|
|
* ILI9488 is not supported
|
|
* Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp
|
|
*
|
|
* If the screen stays white, disable 'LCD_RESET_PIN'
|
|
* to let the bootloader init the screen.
|
|
*
|
|
* Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu
|
|
* because Marlin uses the reset as a failsafe to revive a glitchy LCD.
|
|
*/
|
|
//#define LCD_RESET_PIN PF6
|
|
#define LCD_BACKLIGHT_PIN PG11
|
|
#define FSMC_CS_PIN PG12 // NE4
|
|
#define FSMC_RS_PIN PF0 // A0
|
|
|
|
#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
|
|
#define FSMC_DMA_DEV DMA2
|
|
#define FSMC_DMA_CHANNEL DMA_CH5
|
|
#endif
|
|
|
|
#if NEED_TOUCH_PINS
|
|
#define TOUCH_CS_PIN PB1 // SPI2_NSS
|
|
#define TOUCH_SCK_PIN PB13 // SPI2_SCK
|
|
#define TOUCH_MISO_PIN PB14 // SPI2_MISO
|
|
#define TOUCH_MOSI_PIN PB15 // SPI2_MOSI
|
|
#define TOUCH_INT_PIN -1
|
|
#endif
|
|
|
|
// SPI1(PA7) & SPI3(PB5) not available
|
|
#define ENABLE_SPI2
|
|
|
|
#if ENABLED(SDIO_SUPPORT)
|
|
#define SCK_PIN PB13 // SPI2
|
|
#define MISO_PIN PB14 // SPI2
|
|
#define MOSI_PIN PB15 // SPI2
|
|
#define SD_DETECT_PIN PF12 // SD_CD
|
|
#else
|
|
// SD as custom software SPI (SDIO pins)
|
|
#define SCK_PIN PC12
|
|
#define MISO_PIN PC8
|
|
#define MOSI_PIN PD2
|
|
#define SS_PIN -1
|
|
#define ONBOARD_SD_CS_PIN PC11
|
|
#define SDSS PD2
|
|
#define SD_DETECT_PIN -1
|
|
#endif
|
|
|
|
#if HAS_TMC_UART
|
|
/**
|
|
* TMC2208/TMC2209 stepper drivers
|
|
*
|
|
* Hardware serial communication ports.
|
|
* If undefined software serial is used according to the pins below
|
|
*/
|
|
//#define X_HARDWARE_SERIAL Serial1
|
|
//#define X2_HARDWARE_SERIAL Serial1
|
|
//#define Y_HARDWARE_SERIAL Serial1
|
|
//#define Y2_HARDWARE_SERIAL Serial1
|
|
//#define Z_HARDWARE_SERIAL Serial1
|
|
//#define Z2_HARDWARE_SERIAL Serial1
|
|
//#define E0_HARDWARE_SERIAL Serial1
|
|
//#define E1_HARDWARE_SERIAL Serial1
|
|
//#define E2_HARDWARE_SERIAL Serial1
|
|
//#define E3_HARDWARE_SERIAL Serial1
|
|
//#define E4_HARDWARE_SERIAL Serial1
|
|
|
|
// Unused servo pins may be repurposed with SoftwareSerialM
|
|
//#define X_SERIAL_TX_PIN PF8 // SERVO3_PIN -- XS2 - 6
|
|
//#define Y_SERIAL_TX_PIN PF9 // SERVO2_PIN -- XS2 - 5
|
|
//#define Z_SERIAL_TX_PIN PA1 // SERVO1_PIN -- XS1 - 6
|
|
//#define E0_SERIAL_TX_PIN PC3 // SERVO0_PIN -- XS1 - 5
|
|
//#define X_SERIAL_RX_PIN X_SERIAL_TX_PIN
|
|
//#define Y_SERIAL_RX_PIN Y_SERIAL_TX_PIN
|
|
//#define Z_SERIAL_RX_PIN Z_SERIAL_TX_PIN
|
|
//#define E0_SERIAL_RX_PIN E0_SERIAL_TX_PIN
|
|
|
|
// Reduce baud rate for software serial reliability
|
|
#if HAS_TMC_SW_SERIAL
|
|
#define TMC_BAUD_RATE 19200
|
|
#endif
|
|
#endif
|