b4tman
/
Marlin
1
0
Fork 0
Code Issues Releases 3 Activity
Marlin/Marlin/src/lcd/menu/menu_main.cpp

315 lines
7.9 KiB
C++
Raw Blame History

/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
//
// Main Menu
//
#include "../../inc/MarlinConfigPre.h"
#if HAS_LCD_MENU
#include "menu_item.h"
#include "../../module/temperature.h"
#include "../../gcode/queue.h"
#include "../../module/printcounter.h"
#include "../../module/stepper.h"
#include "../../sd/cardreader.h"
#if HAS_GAMES && DISABLED(LCD_INFO_MENU)
#include "game/game.h"
#endif
#if EITHER(SDSUPPORT, HOST_PROMPT_SUPPORT) || defined(ACTION_ON_CANCEL)
#define MACHINE_CAN_STOP 1
#endif
#if ANY(SDSUPPORT, HOST_PROMPT_SUPPORT, PARK_HEAD_ON_PAUSE) || defined(ACTION_ON_PAUSE)
#define MACHINE_CAN_PAUSE 1
#endif
#if ENABLED(PRUSA_MMU2)
#include "../../lcd/menu/menu_mmu2.h"
#endif
#if ENABLED(PASSWORD_FEATURE)
#include "../../feature/password/password.h"
#endif
void menu_tune();
void menu_cancelobject();
void menu_motion();
void menu_temperature();
void menu_configuration();
#if ENABLED(CUSTOM_USER_MENUS)
void menu_user();
#endif
#if HAS_POWER_MONITOR
void menu_power_monitor();
#endif
#if ENABLED(MIXING_EXTRUDER)
void menu_mixer();
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
void _menu_temp_filament_op(const PauseMode, const int8_t);
void menu_change_filament();
#endif
#if ENABLED(LCD_INFO_MENU)
void menu_info();
#endif
#if EITHER(LED_CONTROL_MENU, CASE_LIGHT_MENU)
void menu_led();
#endif
#if HAS_CUTTER
void menu_spindle_laser();
#endif
extern const char M21_STR[];
void menu_main() {
const bool busy = printingIsActive()
#if ENABLED(SDSUPPORT)
, card_detected = card.isMounted()
, card_open = card_detected && card.isFileOpen()
#endif
;
START_MENU();
BACK_ITEM(MSG_INFO_SCREEN);
if (busy) {
#if MACHINE_CAN_PAUSE
ACTION_ITEM(MSG_PAUSE_PRINT, ui.pause_print);
#endif
#if MACHINE_CAN_STOP
SUBMENU(MSG_STOP_PRINT, []{
MenuItem_confirm::select_screen(
GET_TEXT(MSG_BUTTON_STOP), GET_TEXT(MSG_BACK),
ui.abort_print, ui.goto_previous_screen,
GET_TEXT(MSG_STOP_PRINT), (const char *)nullptr, PSTR("?")
);
});
#endif
SUBMENU(MSG_TUNE, menu_tune);
#if ENABLED(CANCEL_OBJECTS) && DISABLED(SLIM_LCD_MENUS)
SUBMENU(MSG_CANCEL_OBJECT, []{ editable.int8 = -1; ui.goto_screen(menu_cancelobject); });
#endif
}
else {
#if !HAS_ENCODER_WHEEL && ENABLED(SDSUPPORT)
// *** IF THIS SECTION IS CHANGED, REPRODUCE BELOW ***
//
// Autostart
//
#if ENABLED(MENU_ADDAUTOSTART)
ACTION_ITEM(MSG_AUTOSTART, card.beginautostart);
#endif
if (card_detected) {
if (!card_open) {
SUBMENU(MSG_MEDIA_MENU, TERN(PASSWORD_ON_SD_PRINT_MENU, password.media_gatekeeper, menu_media));
#if PIN_EXISTS(SD_DETECT)
GCODES_ITEM(MSG_CHANGE_MEDIA, M21_STR);
#else
GCODES_ITEM(MSG_RELEASE_MEDIA, PSTR("M22"));
#endif
}
}
else {
#if PIN_EXISTS(SD_DETECT)
ACTION_ITEM(MSG_NO_MEDIA, nullptr);
#else
GCODES_ITEM(MSG_ATTACH_MEDIA, M21_STR);
#endif
}
#endif // !HAS_ENCODER_WHEEL && SDSUPPORT
if (TERN0(MACHINE_CAN_PAUSE, printingIsPaused()))
ACTION_ITEM(MSG_RESUME_PRINT, ui.resume_print);
SUBMENU(MSG_MOTION, menu_motion);
}
#if HAS_CUTTER
SUBMENU(MSG_CUTTER(MENU), menu_spindle_laser);
#endif
#if HAS_TEMPERATURE
SUBMENU(MSG_TEMPERATURE, menu_temperature);
#endif
#if HAS_POWER_MONITOR
SUBMENU(MSG_POWER_MONITOR, menu_power_monitor);
#endif
#if ENABLED(MIXING_EXTRUDER)
SUBMENU(MSG_MIXER, menu_mixer);
#endif
#if ENABLED(MMU2_MENUS)
if (!busy) SUBMENU(MSG_MMU2_MENU, menu_mmu2);
#endif
SUBMENU(MSG_CONFIGURATION, menu_configuration);
#if ENABLED(CUSTOM_USER_MENUS)
#ifdef CUSTOM_USER_MENU_TITLE
SUBMENU_P(PSTR(CUSTOM_USER_MENU_TITLE), menu_user);
#else
SUBMENU(MSG_USER_MENU, menu_user);
#endif
#endif
#if ENABLED(ADVANCED_PAUSE_FEATURE)
#if E_STEPPERS == 1 && DISABLED(FILAMENT_LOAD_UNLOAD_GCODES)
if (thermalManager.targetHotEnoughToExtrude(active_extruder))
GCODES_ITEM(MSG_FILAMENTCHANGE, PSTR("M600 B0"));
else
SUBMENU(MSG_FILAMENTCHANGE, []{ _menu_temp_filament_op(PAUSE_MODE_CHANGE_FILAMENT, 0); });
#else
SUBMENU(MSG_FILAMENTCHANGE, menu_change_filament);
#endif
#endif
#if ENABLED(LCD_INFO_MENU)
SUBMENU(MSG_INFO_MENU, menu_info);
#endif
#if EITHER(LED_CONTROL_MENU, CASE_LIGHT_MENU)
SUBMENU(MSG_LEDS, menu_led);
#endif
//
// Switch power on/off
//
#if ENABLED(PSU_CONTROL)
if (powersupply_on)
GCODES_ITEM(MSG_SWITCH_PS_OFF, PSTR("M81"));
else
GCODES_ITEM(MSG_SWITCH_PS_ON, PSTR("M80"));
#endif
#if BOTH(HAS_ENCODER_WHEEL, SDSUPPORT)
if (!busy) {
// *** IF THIS SECTION IS CHANGED, REPRODUCE ABOVE ***
//
// Autostart
//
#if ENABLED(MENU_ADDAUTOSTART)
ACTION_ITEM(MSG_AUTOSTART, card.beginautostart);
#endif
if (card_detected) {
if (!card_open) {
#if PIN_EXISTS(SD_DETECT)
GCODES_ITEM(MSG_CHANGE_MEDIA, M21_STR);
#else
GCODES_ITEM(MSG_RELEASE_MEDIA, PSTR("M22"));
#endif
SUBMENU(MSG_MEDIA_MENU, TERN(PASSWORD_ON_SD_PRINT_MENU, password.media_gatekeeper, menu_media));
}
}
else {
#if PIN_EXISTS(SD_DETECT)
ACTION_ITEM(MSG_NO_MEDIA, nullptr);
#else
GCODES_ITEM(MSG_ATTACH_MEDIA, M21_STR);
#endif
}
}
#endif // HAS_ENCODER_WHEEL && SDSUPPORT
#if HAS_SERVICE_INTERVALS
static auto _service_reset = [](const int index) {
print_job_timer.resetServiceInterval(index);
ui.completion_feedback();
ui.reset_status();
ui.return_to_status();
};
#if SERVICE_INTERVAL_1 > 0
CONFIRM_ITEM_P(PSTR(SERVICE_NAME_1),
MSG_BUTTON_RESET, MSG_BUTTON_CANCEL,
[]{ _service_reset(1); }, ui.goto_previous_screen,
GET_TEXT(MSG_SERVICE_RESET), F(SERVICE_NAME_1), PSTR("?")
);
#endif
#if SERVICE_INTERVAL_2 > 0
CONFIRM_ITEM_P(PSTR(SERVICE_NAME_2),
MSG_BUTTON_RESET, MSG_BUTTON_CANCEL,
[]{ _service_reset(2); }, ui.goto_previous_screen,
GET_TEXT(MSG_SERVICE_RESET), F(SERVICE_NAME_2), PSTR("?")
);
#endif
#if SERVICE_INTERVAL_3 > 0
CONFIRM_ITEM_P(PSTR(SERVICE_NAME_3),
MSG_BUTTON_RESET, MSG_BUTTON_CANCEL,
[]{ _service_reset(3); }, ui.goto_previous_screen,
GET_TEXT(MSG_SERVICE_RESET), F(SERVICE_NAME_3), PSTR("?")
);
#endif
#endif
#if HAS_GAMES && DISABLED(LCD_INFO_MENU)
#if ENABLED(GAMES_EASTER_EGG)
SKIP_ITEM();
SKIP_ITEM();
SKIP_ITEM();
#endif
// Game sub-menu or the individual game
{
SUBMENU(
#if HAS_GAME_MENU
MSG_GAMES, menu_game
#elif ENABLED(MARLIN_BRICKOUT)
MSG_BRICKOUT, brickout.enter_game
#elif ENABLED(MARLIN_INVADERS)
MSG_INVADERS, invaders.enter_game
#elif ENABLED(MARLIN_SNAKE)
MSG_SNAKE, snake.enter_game
#elif ENABLED(MARLIN_MAZE)
MSG_MAZE, maze.enter_game
#endif
);
}
#endif
END_MENU();
}
#endif // HAS_LCD_MENU
View Git Blame Copy Permalink