b4tman
/
Marlin
1
0
Fork 0
Code Issues Releases 3 Activity

Adafruit Grand Central M4 (#14749)

This commit is contained in:
Giuliano Zaro 2019-07-28 21:48:29 +02:00 committed by Scott Lahteine
parent fec52e61ea
commit 290466578f
125 changed files with 2555 additions and 99 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

1
.travis.yml
View File

@ -19,6 +19,7 @@ env:
- TEST_PLATFORM="esp32"
- TEST_PLATFORM="alfawise_U20"
- TEST_PLATFORM="black_stm32f407ve"
- TEST_PLATFORM="adafruit_grandcentral_m4"
before_install:
#

2
Marlin/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
Marlin/src/HAL/HAL.h
View File

@ -41,6 +41,8 @@
#define HAL_PLATFORM HAL_ESP32
#elif defined(__PLAT_LINUX__)
#define HAL_PLATFORM HAL_LINUX
#elif defined(__SAMD51__)
#define HAL_PLATFORM HAL_SAMD51
#else
#error "Unsupported Platform!"
#endif

475
Marlin/src/HAL/HAL_SAMD51/HAL.cpp Normal file
View File

@ -0,0 +1,475 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef __SAMD51__
#include "../../inc/MarlinConfig.h"
#include "Adafruit_ZeroDMA.h"
#include "wiring_private.h"
// ------------------------
// Local defines
// ------------------------
#if HAS_TEMP_ADC_0
#define GET_TEMP_0_ADC() PIN_TO_ADC(TEMP_0_PIN)
#else
#define GET_TEMP_0_ADC() -1
#endif
#if HAS_TEMP_ADC_1
#define GET_TEMP_1_ADC() PIN_TO_ADC(TEMP_1_PIN)
#else
#define GET_TEMP_1_ADC() -1
#endif
#if HAS_TEMP_ADC_2
#define GET_TEMP_2_ADC() PIN_TO_ADC(TEMP_2_PIN)
#else
#define GET_TEMP_2_ADC() -1
#endif
#if HAS_TEMP_ADC_3
#define GET_TEMP_3_ADC() PIN_TO_ADC(TEMP_3_PIN)
#else
#define GET_TEMP_3_ADC() -1
#endif
#if HAS_TEMP_ADC_4
#define GET_TEMP_4_ADC() PIN_TO_ADC(TEMP_4_PIN)
#else
#define GET_TEMP_4_ADC() -1
#endif
#if HAS_TEMP_ADC_5
#define GET_TEMP_5_ADC() PIN_TO_ADC(TEMP_5_PIN)
#else
#define GET_TEMP_5_ADC() -1
#endif
#if HAS_HEATED_BED
#define GET_BED_ADC() PIN_TO_ADC(TEMP_BED_PIN)
#else
#define GET_BED_ADC() -1
#endif
#if HAS_HEATED_CHAMBER
#define GET_CHAMBER_ADC() PIN_TO_ADC(TEMP_CHAMBER_PIN)
#else
#define GET_CHAMBER_ADC() -1
#endif
#if ENABLED(FILAMENT_WIDTH_SENSOR)
#define GET_FILAMENT_WIDTH_ADC() PIN_TO_ADC(FILWIDTH_PIN)
#else
#define GET_FILAMENT_WIDTH_ADC() -1
#endif
#if HAS_ADC_BUTTONS
#define GET_BUTTONS_ADC() PIN_TO_ADC(ADC_KEYPAD_PIN)
#else
#define GET_BUTTONS_ADC() -1
#endif
#define IS_ADC_REQUIRED(n) (GET_TEMP_0_ADC() == n || GET_TEMP_1_ADC() == n || GET_TEMP_2_ADC() == n \
|| GET_TEMP_3_ADC() == n || GET_TEMP_4_ADC() == n || GET_TEMP_5_ADC() == n \
|| GET_BED_ADC() == n \
|| GET_CHAMBER_ADC() == n \
|| GET_FILAMENT_WIDTH_ADC() == n \
|| GET_BUTTONS_ADC() == n)
#define ADC0_IS_REQUIRED IS_ADC_REQUIRED(0)
#define ADC1_IS_REQUIRED IS_ADC_REQUIRED(1)
#define ADC_IS_REQUIRED (ADC0_IS_REQUIRED || ADC1_IS_REQUIRED)
#if ADC0_IS_REQUIRED
#define FIRST_ADC 0
#else
#define FIRST_ADC 1
#endif
#if ADC1_IS_REQUIRED
#define LAST_ADC 1
#else
#define LAST_ADC 0
#endif
#define DMA_IS_REQUIRED ADC_IS_REQUIRED
// ------------------------
// Types
// ------------------------
#if DMA_IS_REQUIRED
// Struct must be 32 bits aligned because of DMA accesses but fields needs to be 8 bits packed
typedef struct __attribute__((aligned(4), packed)) {
ADC_INPUTCTRL_Type INPUTCTRL;
} HAL_DMA_DAC_Registers; // DMA transfered registers
#endif
// ------------------------
// Private Variables
// ------------------------
uint16_t HAL_adc_result;
#if ADC_IS_REQUIRED
// Pins used by ADC inputs. Order must be ADC0 inputs first then ADC1
const uint8_t adc_pins[] = {
// ADC0 pins
#if GET_TEMP_0_ADC() == 0
TEMP_0_PIN,
#endif
#if GET_TEMP_1_ADC() == 0
TEMP_1_PIN,
#endif
#if GET_TEMP_2_ADC() == 0
TEMP_2_PIN,
#endif
#if GET_TEMP_3_ADC() == 0
TEMP_3_PIN,
#endif
#if GET_TEMP_4_ADC() == 0
TEMP_4_PIN,
#endif
#if GET_TEMP_5_ADC() == 0
TEMP_5_PIN,
#endif
#if GET_BED_ADC() == 0
TEMP_BED_PIN,
#endif
#if GET_CHAMBER_ADC() == 0
TEMP_CHAMBER_PIN,
#endif
#if GET_FILAMENT_WIDTH_ADC() == 0
FILWIDTH_PIN,
#endif
#if GET_BUTTONS_ADC() == 0
ADC_KEYPAD_PIN,
#endif
// ADC1 pins
#if GET_TEMP_0_ADC() == 1
TEMP_0_PIN,
#endif
#if GET_TEMP_1_ADC() == 1
TEMP_1_PIN,
#endif
#if GET_TEMP_2_ADC() == 1
TEMP_2_PIN,
#endif
#if GET_TEMP_3_ADC() == 1
TEMP_3_PIN,
#endif
#if GET_TEMP_4_ADC() == 1
TEMP_4_PIN,
#endif
#if GET_TEMP_5_ADC() == 1
TEMP_5_PIN,
#endif
#if GET_BED_ADC() == 1
TEMP_BED_PIN,
#endif
#if GET_CHAMBER_ADC() == 1
TEMP_CHAMBER_PIN,
#endif
#if GET_FILAMENT_WIDTH_ADC() == 1
FILWIDTH_PIN,
#endif
#if GET_BUTTONS_ADC() == 1
ADC_KEYPAD_PIN,
#endif
};
uint16_t HAL_adc_results[COUNT(adc_pins)];
#if ADC0_IS_REQUIRED
Adafruit_ZeroDMA adc0ProgramDMA,
adc0ReadDMA;
const HAL_DMA_DAC_Registers adc0_dma_regs_list[] = {
#if GET_TEMP_0_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_0_PIN) },
#endif
#if GET_TEMP_1_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_1_PIN) },
#endif
#if GET_TEMP_2_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_2_PIN) },
#endif
#if GET_TEMP_3_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_3_PIN) },
#endif
#if GET_TEMP_4_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_4_PIN) },
#endif
#if GET_TEMP_5_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_5_PIN) },
#endif
#if GET_BED_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_BED_PIN) },
#endif
#if GET_CHAMBER_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_CHAMBER_PIN) },
#endif
#if GET_FILAMENT_WIDTH_ADC() == 0
{ PIN_TO_INPUTCTRL(FILWIDTH_PIN) },
#endif
#if GET_BUTTONS_ADC() == 0
{ PIN_TO_INPUTCTRL(ADC_KEYPAD_PIN) },
#endif
};
#define ADC0_AINCOUNT COUNT(adc0_dma_regs_list)
#endif // ADC0_IS_REQUIRED
#if ADC1_IS_REQUIRED
Adafruit_ZeroDMA adc1ProgramDMA,
adc1ReadDMA;
const HAL_DMA_DAC_Registers adc1_dma_regs_list[] = {
#if GET_TEMP_0_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_0_PIN) },
#endif
#if GET_TEMP_1_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_1_PIN) },
#endif
#if GET_TEMP_2_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_2_PIN) },
#endif
#if GET_TEMP_3_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_3_PIN) },
#endif
#if GET_TEMP_4_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_4_PIN) },
#endif
#if GET_TEMP_5_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_5_PIN) },
#endif
#if GET_BED_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_BED_PIN) },
#endif
#if GET_CHAMBER_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_CHAMBER_PIN) },
#endif
#if GET_FILAMENT_WIDTH_ADC() == 1
{ PIN_TO_INPUTCTRL(FILWIDTH_PIN) },
#endif
#if GET_BUTTONS_ADC() == 1
{ PIN_TO_INPUTCTRL(ADC_KEYPAD_PIN) },
#endif
};
#define ADC1_AINCOUNT COUNT(adc1_dma_regs_list)
#endif // ADC1_IS_REQUIRED
#endif // ADC_IS_REQUIRED
// ------------------------
// Private functions
// ------------------------
#if DMA_IS_REQUIRED
void dma_init() {
DmacDescriptor *descriptor;
#if ADC0_IS_REQUIRED
adc0ProgramDMA.setTrigger(ADC0_DMAC_ID_SEQ);
adc0ProgramDMA.setAction(DMA_TRIGGER_ACTON_BEAT);
adc0ProgramDMA.loop(true);
if (adc0ProgramDMA.allocate() == DMA_STATUS_OK) {
descriptor = adc0ProgramDMA.addDescriptor(
(void *)adc0_dma_regs_list, // SRC
(void *)&ADC0->DSEQDATA.reg, // DEST
sizeof(adc0_dma_regs_list) / 4, // CNT
DMA_BEAT_SIZE_WORD,
true, // SRCINC
false, // DSTINC
DMA_ADDRESS_INCREMENT_STEP_SIZE_1, // STEPSIZE
DMA_STEPSEL_SRC // STEPSEL
);
if (descriptor != nullptr)
descriptor->BTCTRL.bit.EVOSEL = DMA_EVENT_OUTPUT_BEAT;
adc0ProgramDMA.startJob();
}
adc0ReadDMA.setTrigger(ADC0_DMAC_ID_RESRDY);
adc0ReadDMA.setAction(DMA_TRIGGER_ACTON_BEAT);
adc0ReadDMA.loop(true);
if (adc0ReadDMA.allocate() == DMA_STATUS_OK) {
adc0ReadDMA.addDescriptor(
(void *)&ADC0->RESULT.reg, // SRC
&HAL_adc_results, // DEST
ADC0_AINCOUNT, // CNT
DMA_BEAT_SIZE_HWORD,
false, // SRCINC
true, // DSTINC
DMA_ADDRESS_INCREMENT_STEP_SIZE_1, // STEPSIZE
DMA_STEPSEL_DST // STEPSEL
);
adc0ReadDMA.startJob();
}
#endif
#if ADC1_IS_REQUIRED
adc1ProgramDMA.setTrigger(ADC1_DMAC_ID_SEQ);
adc1ProgramDMA.setAction(DMA_TRIGGER_ACTON_BEAT);
adc1ProgramDMA.loop(true);
if (adc1ProgramDMA.allocate() == DMA_STATUS_OK) {
descriptor = adc1ProgramDMA.addDescriptor(
(void *)adc1_dma_regs_list, // SRC
(void *)&ADC1->DSEQDATA.reg, // DEST
sizeof(adc1_dma_regs_list) / 4, // CNT
DMA_BEAT_SIZE_WORD,
true, // SRCINC
false, // DSTINC
DMA_ADDRESS_INCREMENT_STEP_SIZE_1, // STEPSIZE
DMA_STEPSEL_SRC // STEPSEL
);
if (descriptor != nullptr)
descriptor->BTCTRL.bit.EVOSEL = DMA_EVENT_OUTPUT_BEAT;
adc1ProgramDMA.startJob();
}
adc1ReadDMA.setTrigger(ADC1_DMAC_ID_RESRDY);
adc1ReadDMA.setAction(DMA_TRIGGER_ACTON_BEAT);
adc1ReadDMA.loop(true);
if (adc1ReadDMA.allocate() == DMA_STATUS_OK) {
adc1ReadDMA.addDescriptor(
(void *)&ADC1->RESULT.reg, // SRC
&HAL_adc_results[ADC0_AINCOUNT], // DEST
ADC1_AINCOUNT, // CNT
DMA_BEAT_SIZE_HWORD,
false, // SRCINC
true, // DSTINC
DMA_ADDRESS_INCREMENT_STEP_SIZE_1, // STEPSIZE
DMA_STEPSEL_DST // STEPSEL
);
adc1ReadDMA.startJob();
}
#endif
DMAC->PRICTRL0.bit.RRLVLEN0 = true; // Activate round robin for DMA channels used by ADCs
}
#endif // DMA_IS_REQUIRED
// ------------------------
// Public functions
// ------------------------
// HAL initialization task
void HAL_init(void) {
#if DMA_IS_REQUIRED
dma_init();
#endif
#if ENABLED(SDSUPPORT)
#if SD_CONNECTION_IS(ONBOARD) && PIN_EXISTS(SD_DETECT) // SD_DETECT_PIN may be remove when NO_SD_HOST_DRIVE is not defined in configuration_adv
SET_INPUT_PULLUP(SD_DETECT_PIN);
#endif
OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up
#endif
}
// HAL idle task
/*
void HAL_idletask(void) {
}
*/
void HAL_clear_reset_source(void) { }
#pragma push_macro("WDT")
#undef WDT // Required to be able to use '.bit.WDT'. Compiler wrongly replace struct field with WDT define
uint8_t HAL_get_reset_source(void) {
RSTC_RCAUSE_Type resetCause;
resetCause.reg = REG_RSTC_RCAUSE;
if (resetCause.bit.POR) return RST_POWER_ON;
else if (resetCause.bit.EXT) return RST_EXTERNAL;
else if (resetCause.bit.BODCORE || resetCause.bit.BODVDD) return RST_BROWN_OUT;
else if (resetCause.bit.WDT) return RST_WATCHDOG;
else if (resetCause.bit.SYST || resetCause.bit.NVM) return RST_SOFTWARE;
else if (resetCause.bit.BACKUP) return RST_BACKUP;
return 0;
}
#pragma pop_macro("WDT")
extern "C" {
void * _sbrk(int incr);
extern unsigned int __bss_end__; // end of bss section
}
// Return free memory between end of heap (or end bss) and whatever is current
int freeMemory() {
int free_memory, heap_end = (int)_sbrk(0);
return (int)&free_memory - (heap_end ? heap_end : (int)&__bss_end__);
}
// ------------------------
// ADC
// ------------------------
void HAL_adc_init(void) {
#if ADC_IS_REQUIRED
memset(HAL_adc_results, 0xFF, sizeof(HAL_adc_results)); // Fill result with invalid values
for (uint8_t pi = 0; pi < COUNT(adc_pins); ++pi)
pinPeripheral(adc_pins[pi], PIO_ANALOG);
for (uint8_t ai = FIRST_ADC; ai <= LAST_ADC; ++ai) {
Adc* adc = ((Adc*[])ADC_INSTS)[ai];
// ADC clock setup
GCLK->PCHCTRL[ADC0_GCLK_ID + ai].bit.CHEN = false;
SYNC(GCLK->PCHCTRL[ADC0_GCLK_ID + ai].bit.CHEN);
GCLK->PCHCTRL[ADC0_GCLK_ID + ai].reg = GCLK_PCHCTRL_GEN_GCLK1 | GCLK_PCHCTRL_CHEN; // 48MHz startup code programmed
SYNC(!GCLK->PCHCTRL[ADC0_GCLK_ID + ai].bit.CHEN);
adc->CTRLA.bit.PRESCALER = ADC_CTRLA_PRESCALER_DIV32_Val; // 1.5MHZ adc clock
// ADC setup
// Preloaded data (fixed for all ADC instances hence not loaded by DMA)
adc->REFCTRL.bit.REFSEL = ADC_REFCTRL_REFSEL_AREFA_Val; // VRefA pin
SYNC(adc->SYNCBUSY.bit.REFCTRL);
adc->CTRLB.bit.RESSEL = ADC_CTRLB_RESSEL_10BIT_Val;
SYNC(adc->SYNCBUSY.bit.CTRLB);
adc->SAMPCTRL.bit.SAMPLEN = (6 - 1); // Sampling clocks
// Registers loaded by DMA
adc->DSEQCTRL.bit.INPUTCTRL = true;
adc->DSEQCTRL.bit.AUTOSTART = true; // Start conversion after DMA sequence
adc->CTRLA.bit.ENABLE = true; // Enable ADC
SYNC(adc->SYNCBUSY.bit.ENABLE);
}
#endif // ADC_IS_REQUIRED
}
void HAL_adc_start_conversion(const uint8_t adc_pin) {
#if ADC_IS_REQUIRED
for (uint8_t pi = 0; pi < COUNT(adc_pins); ++pi) {
if (adc_pin == adc_pins[pi]) {
HAL_adc_result = HAL_adc_results[pi];
return;
}
}
#endif
HAL_adc_result = 0xFFFF;
}
uint16_t HAL_adc_get_result(void) {
return HAL_adc_result;
}
#endif // __SAMD51__

141
Marlin/src/HAL/HAL_SAMD51/HAL.h Normal file
View File

@ -0,0 +1,141 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#define CPU_32_BIT
#include "../shared/Marduino.h"
#include "../shared/math_32bit.h"
#include "../shared/HAL_SPI.h"
#include "fastio_SAMD51.h"
#include "watchdog_SAMD51.h"
#include "HAL_timers_SAMD51.h"
#ifdef ADAFRUIT_GRAND_CENTRAL_M4
#include "MarlinSerial_AGCM4.h"
// Serial ports
#if !WITHIN(SERIAL_PORT, -1, 3)
#error "SERIAL_PORT must be from -1 to 3"
#endif
// MYSERIAL0 required before MarlinSerial includes!
#if SERIAL_PORT == -1
#define MYSERIAL0 Serial
#elif SERIAL_PORT == 0
#define MYSERIAL0 Serial1
#elif SERIAL_PORT == 1
#define MYSERIAL0 Serial2
#elif SERIAL_PORT == 2
#define MYSERIAL0 Serial3
#else
#define MYSERIAL0 Serial4
#endif
#ifdef SERIAL_PORT_2
#if !WITHIN(SERIAL_PORT_2, -1, 3)
#error "SERIAL_PORT_2 must be from -1 to 3"
#elif SERIAL_PORT_2 == SERIAL_PORT
#error "SERIAL_PORT_2 must be different than SERIAL_PORT"
#endif
#define NUM_SERIAL 2
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 Serial
#elif SERIAL_PORT_2 == 0
#define MYSERIAL1 Serial1
#elif SERIAL_PORT_2 == 1
#define MYSERIAL1 Serial2
#elif SERIAL_PORT_2 == 2
#define MYSERIAL1 Serial3
#else
#define MYSERIAL1 Serial4
#endif
#else
#define NUM_SERIAL 1
#endif
#endif // ADAFRUIT_GRAND_CENTRAL_M4
typedef int8_t pin_t;
//#define HAL_SERVO_LIB Servo
//
// Interrupts
//
#define CRITICAL_SECTION_START uint32_t primask = __get_PRIMASK(); __disable_irq()
#define CRITICAL_SECTION_END if (!primask) __enable_irq()
#define ISRS_ENABLED() (!__get_PRIMASK())
#define ENABLE_ISRS() __enable_irq()
#define DISABLE_ISRS() __disable_irq()
#define cli() __disable_irq() // Disable interrupts
#define sei() __enable_irq() // Enable interrupts
void HAL_clear_reset_source(void); // clear reset reason
uint8_t HAL_get_reset_source(void); // get reset reason
//
// EEPROM
//
void eeprom_write_byte(uint8_t *pos, unsigned char value);
uint8_t eeprom_read_byte(uint8_t *pos);
//
// ADC
//
extern uint16_t HAL_adc_result; // result of last ADC conversion
#define HAL_ANALOG_SELECT(pin)
void HAL_adc_init(void);
#define HAL_START_ADC(pin) HAL_adc_start_conversion(pin)
#define HAL_READ_ADC() HAL_adc_result
#define HAL_ADC_READY() true
void HAL_adc_start_conversion(const uint8_t adc_pin);
uint16_t HAL_adc_get_result(void);
//
// Pin Map
//
#define GET_PIN_MAP_PIN(index) index
#define GET_PIN_MAP_INDEX(pin) pin
#define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)
//
// Tone
//
void toneInit();
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration=0);
void noTone(const pin_t _pin);
// Enable hooks into idle and setup for HAL
void HAL_init(void);
/*#define HAL_IDLETASK 1
void HAL_idletask(void);*/
//
// Utility functions
//
FORCE_INLINE void _delay_ms(const int delay_ms) { delay(delay_ms); }
int freeMemory(void);

151
Marlin/src/HAL/HAL_SAMD51/HAL_spi_SAMD51.cpp Normal file
View File

@ -0,0 +1,151 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Hardware and software SPI implementations are included in this file.
*
* Control of the slave select pin(s) is handled by the calling routines and
* SAMD51 let hardware SPI handling to remove SS from its logic.
*/
#ifdef __SAMD51__
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include "../../inc/MarlinConfig.h"
#include <SPI.h>
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
#if EITHER(SOFTWARE_SPI, FORCE_SOFT_SPI)
// ------------------------
// Software SPI
// ------------------------
#error "Software SPI not supported for SAMD51. Use Hardware SPI."
#if SD_CONNECTION_IS(ONBOARD)
#endif
#else // !SOFTWARE_SPI
#ifdef ADAFRUIT_GRAND_CENTRAL_M4
#if SD_CONNECTION_IS(ONBOARD)
#define sdSPI SDCARD_SPI
#else
#define sdSPI SPI
#endif
#endif
static SPISettings spiConfig;
// ------------------------
// Hardware SPI
// ------------------------
void spiBegin(void) {
spiInit(SPI_HALF_SPEED);
}
void spiInit(uint8_t spiRate) {
// Use datarates Marlin uses
uint32_t clock;
switch (spiRate) {
case SPI_FULL_SPEED: clock = 8000000; break;
case SPI_HALF_SPEED: clock = 4000000; break;
case SPI_QUARTER_SPEED: clock = 2000000; break;
case SPI_EIGHTH_SPEED: clock = 1000000; break;
case SPI_SIXTEENTH_SPEED: clock = 500000; break;
case SPI_SPEED_5: clock = 250000; break;
case SPI_SPEED_6: clock = 125000; break;
default: clock = 4000000; break; // Default from the SPI library
}
spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
sdSPI.begin();
}
/**
* @brief Receives a single byte from the SPI port.
*
* @return Byte received
*
* @details
*/
uint8_t spiRec(void) {
sdSPI.beginTransaction(spiConfig);
uint8_t returnByte = sdSPI.transfer(0xFF);
sdSPI.endTransaction();
return returnByte;
}
/**
* @brief Receives a number of bytes from the SPI port to a buffer
*
* @param buf Pointer to starting address of buffer to write to.
* @param nbyte Number of bytes to receive.
* @return Nothing
*/
void spiRead(uint8_t* buf, uint16_t nbyte) {
if (nbyte == 0) return;
memset(buf, 0xFF, nbyte);
sdSPI.beginTransaction(spiConfig);
sdSPI.transfer(buf, nbyte);
sdSPI.endTransaction();
}
/**
* @brief Sends a single byte on SPI port
*
* @param b Byte to send
*
* @details
*/
void spiSend(uint8_t b) {
sdSPI.beginTransaction(spiConfig);
sdSPI.transfer(b);
sdSPI.endTransaction();
}
/**
* @brief Write token and then write from 512 byte buffer to SPI (for SD card)
*
* @param buf Pointer with buffer start address
* @return Nothing
*
* @details Uses DMA
*/
void spiSendBlock(uint8_t token, const uint8_t* buf) {
sdSPI.beginTransaction(spiConfig);
sdSPI.transfer(token);
sdSPI.transfer((uint8_t*)buf, nullptr, 512);
sdSPI.endTransaction();
}
void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
spiConfig = SPISettings(spiClock, (BitOrder)bitOrder, dataMode);
sdSPI.beginTransaction(spiConfig);
}
#endif // !SOFTWARE_SPI
#endif // __SAMD51__

135
Marlin/src/HAL/HAL_SAMD51/HAL_timers_SAMD51.cpp Normal file
View File

@ -0,0 +1,135 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef __SAMD51__
// --------------------------------------------------------------------------
// Includes
// --------------------------------------------------------------------------
#include "../../inc/MarlinConfig.h"
#include "HAL_timers_SAMD51.h"
// --------------------------------------------------------------------------
// Local defines
// --------------------------------------------------------------------------
#define NUM_HARDWARE_TIMERS 8
// --------------------------------------------------------------------------
// Private Variables
// --------------------------------------------------------------------------
const tTimerConfig TimerConfig[NUM_HARDWARE_TIMERS] = {
{ TC0, TC0_IRQn, TC_PRIORITY(0) },
{ TC1, TC1_IRQn, TC_PRIORITY(1) },
{ TC2, TC2_IRQn, TC_PRIORITY(2) },
{ TC3, TC3_IRQn, TC_PRIORITY(3) },
{ TC4, TC4_IRQn, TC_PRIORITY(4) },
{ TC5, TC5_IRQn, TC_PRIORITY(5) },
{ TC6, TC6_IRQn, TC_PRIORITY(6) },
{ TC7, TC7_IRQn, TC_PRIORITY(7) }
};
// --------------------------------------------------------------------------
// Private functions
// --------------------------------------------------------------------------
FORCE_INLINE void Disable_Irq(IRQn_Type irq) {
NVIC_DisableIRQ(irq);
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
__DSB();
__ISB();
}
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
Tc * const tc = TimerConfig[timer_num].pTimer;
IRQn_Type irq = TimerConfig[timer_num].IRQ_Id;
// Disable interrupt, just in case it was already enabled
Disable_Irq(irq);
// Disable timer interrupt
tc->COUNT32.INTENCLR.reg = TC_INTENCLR_OVF; // disable overflow interrupt
// TCn clock setup
const uint8_t clockID = GCLK_CLKCTRL_IDs[TCC_INST_NUM + timer_num];
GCLK->PCHCTRL[clockID].bit.CHEN = false;
SYNC(GCLK->PCHCTRL[clockID].bit.CHEN);
GCLK->PCHCTRL[clockID].reg = GCLK_PCHCTRL_GEN_GCLK0 | GCLK_PCHCTRL_CHEN; // 120MHz startup code programmed
SYNC(!GCLK->PCHCTRL[clockID].bit.CHEN);
// Stop timer, just in case, to be able to reconfigure it
tc->COUNT32.CTRLA.bit.ENABLE = false;
SYNC(tc->COUNT32.SYNCBUSY.bit.ENABLE);
// Reset timer
tc->COUNT32.CTRLA.bit.SWRST = true;
SYNC(tc->COUNT32.SYNCBUSY.bit.SWRST);
NVIC_SetPriority(irq, TimerConfig[timer_num].priority);
// Wave mode, reset counter on overflow on 0 (I use count down to prevent double buffer use)
tc->COUNT32.WAVE.reg = TC_WAVE_WAVEGEN_MFRQ;
tc->COUNT32.CTRLA.reg = TC_CTRLA_MODE_COUNT32 | TC_CTRLA_PRESCALER_DIV1;
tc->COUNT32.CTRLBSET.reg = TC_CTRLBCLR_DIR;
SYNC(tc->COUNT32.SYNCBUSY.bit.CTRLB);
// Set compare value
tc->COUNT32.COUNT.reg = tc->COUNT32.CC[0].reg = HAL_TIMER_RATE / frequency;
// And start timer
tc->COUNT32.CTRLA.bit.ENABLE = true;
SYNC(tc->COUNT32.SYNCBUSY.bit.ENABLE);
// Enable interrupt on RC compare
tc->COUNT32.INTENSET.reg = TC_INTENCLR_OVF; // enable overflow interrupt
// Finally, enable IRQ
NVIC_EnableIRQ(irq);
}
void HAL_timer_enable_interrupt(const uint8_t timer_num) {
IRQn_Type irq = TimerConfig[timer_num].IRQ_Id;
NVIC_EnableIRQ(irq);
}
void HAL_timer_disable_interrupt(const uint8_t timer_num) {
IRQn_Type irq = TimerConfig[timer_num].IRQ_Id;
Disable_Irq(irq);
}
// missing from CMSIS: Check if interrupt is enabled or not
static bool NVIC_GetEnabledIRQ(IRQn_Type IRQn) {
return (NVIC->ISER[(uint32_t)(IRQn) >> 5] & (1 << ((uint32_t)(IRQn) & 0x1F))) != 0;
}
bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
IRQn_Type irq = TimerConfig[timer_num].IRQ_Id;
return NVIC_GetEnabledIRQ(irq);
}
#endif // __SAMD51__

117
Marlin/src/HAL/HAL_SAMD51/HAL_timers_SAMD51.h Normal file
View File

@ -0,0 +1,117 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#include <stdint.h>
// --------------------------------------------------------------------------
// Defines
// --------------------------------------------------------------------------
typedef uint32_t hal_timer_t;
#define HAL_TIMER_TYPE_MAX 0xFFFFFFFF
#define HAL_TIMER_RATE SystemCoreClock // frequency of timers peripherals
#define STEP_TIMER_NUM 0 // index of timer to use for stepper (also +1 for 32bits counter)
#define PULSE_TIMER_NUM STEP_TIMER_NUM
#define TONE_TIMER_NUM 2 // index of timer to use for beeper tones (also +1 for 32bits counter)
#define TEMP_TIMER_NUM 4 // index of timer to use for temperature (also +1 for 32bits counter)
#define TEMP_TIMER_FREQUENCY 1000 // temperature interrupt frequency
#define STEPPER_TIMER_RATE HAL_TIMER_RATE // frequency of stepper timer (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE)
#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
#define STEPPER_TIMER_PRESCALE (CYCLES_PER_MICROSECOND / STEPPER_TIMER_TICKS_PER_US)
#define PULSE_TIMER_RATE STEPPER_TIMER_RATE
#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(STEP_TIMER_NUM)
#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(STEP_TIMER_NUM)
#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(STEP_TIMER_NUM)
#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(TEMP_TIMER_NUM)
#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(TEMP_TIMER_NUM)
#define TC_PRIORITY(t) (t == STEP_TIMER_NUM || t == PULSE_TIMER_NUM) ? 2 \
: (t == TEMP_TIMER_NUM) ? 6 \
: (t == TONE_TIMER_NUM) ? 5 : 7
#define _TC_HANDLER(t) void TC##t##_Handler()
#define TC_HANDLER(t) _TC_HANDLER(t)
#define HAL_STEP_TIMER_ISR() TC_HANDLER(STEP_TIMER_NUM)
#if STEP_TIMER_NUM != PULSE_TIMER_NUM
#define HAL_PULSE_TIMER_ISR() TC_HANDLER(PULSE_TIMER_NUM)
#endif
#define HAL_TEMP_TIMER_ISR() TC_HANDLER(TEMP_TIMER_NUM)
#define HAL_TONE_TIMER_ISR() TC_HANDLER(TONE_TIMER_NUM)
// --------------------------------------------------------------------------
// Types
// --------------------------------------------------------------------------
typedef struct {
Tc *pTimer;
IRQn_Type IRQ_Id;
uint8_t priority;
} tTimerConfig;
// --------------------------------------------------------------------------
// Public Variables
// --------------------------------------------------------------------------
extern const tTimerConfig TimerConfig[];
// --------------------------------------------------------------------------
// Public functions
// --------------------------------------------------------------------------
void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare) {
Tc * const tc = TimerConfig[timer_num].pTimer;
tc->COUNT32.CC[0].reg = HAL_TIMER_TYPE_MAX - compare;
}
FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
Tc * const tc = TimerConfig[timer_num].pTimer;
return (hal_timer_t)(HAL_TIMER_TYPE_MAX - tc->COUNT32.CC[0].reg);
}
FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
Tc * const tc = TimerConfig[timer_num].pTimer;
tc->COUNT32.CTRLBSET.reg = TC_CTRLBCLR_CMD_READSYNC;
SYNC(tc->COUNT32.SYNCBUSY.bit.CTRLB || tc->COUNT32.SYNCBUSY.bit.COUNT);
return HAL_TIMER_TYPE_MAX - tc->COUNT32.COUNT.reg;
}
void HAL_timer_enable_interrupt(const uint8_t timer_num);
void HAL_timer_disable_interrupt(const uint8_t timer_num);
bool HAL_timer_interrupt_enabled(const uint8_t timer_num);
FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
Tc * const tc = TimerConfig[timer_num].pTimer;
// Clear interrupt flag
tc->COUNT32.INTFLAG.reg = TC_INTFLAG_OVF;
}
#define HAL_timer_isr_epilogue(timer_num)

55
Marlin/src/HAL/HAL_SAMD51/MarlinSerial_AGCM4.cpp Normal file
View File

@ -0,0 +1,55 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef ADAFRUIT_GRAND_CENTRAL_M4
/**
* Framework doesn't define some serial to save sercom resources
* hence if these are used I need to define them
*/
#include "../../inc/MarlinConfig.h"
#if SERIAL_PORT == 1 || SERIAL_PORT_2 == 1
Uart Serial2(&sercom4, PIN_SERIAL2_RX, PIN_SERIAL2_TX, PAD_SERIAL2_RX, PAD_SERIAL2_TX);
void SERCOM4_0_Handler() { Serial2.IrqHandler(); }
void SERCOM4_1_Handler() { Serial2.IrqHandler(); }
void SERCOM4_2_Handler() { Serial2.IrqHandler(); }
void SERCOM4_3_Handler() { Serial2.IrqHandler(); }
#endif
#if SERIAL_PORT == 2 || SERIAL_PORT_2 == 2
Uart Serial3(&sercom1, PIN_SERIAL3_RX, PIN_SERIAL3_TX, PAD_SERIAL3_RX, PAD_SERIAL3_TX);
void SERCOM1_0_Handler() { Serial3.IrqHandler(); }
void SERCOM1_1_Handler() { Serial3.IrqHandler(); }
void SERCOM1_2_Handler() { Serial3.IrqHandler(); }
void SERCOM1_3_Handler() { Serial3.IrqHandler(); }
#endif
#if SERIAL_PORT == 3 || SERIAL_PORT_2 == 3
Uart Serial4(&sercom5, PIN_SERIAL4_RX, PIN_SERIAL4_TX, PAD_SERIAL4_RX, PAD_SERIAL4_TX);
void SERCOM5_0_Handler() { Serial4.IrqHandler(); }
void SERCOM5_1_Handler() { Serial4.IrqHandler(); }
void SERCOM5_2_Handler() { Serial4.IrqHandler(); }
void SERCOM5_3_Handler() { Serial4.IrqHandler(); }
#endif
#endif // ADAFRUIT_GRAND_CENTRAL_M4

25
Marlin/src/HAL/HAL_SAMD51/MarlinSerial_AGCM4.h Normal file
View File

@ -0,0 +1,25 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
extern Uart Serial2;
extern Uart Serial3;
extern Uart Serial4;

70
Marlin/src/HAL/HAL_SAMD51/SAMD51.h Normal file
View File

@ -0,0 +1,70 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#define SYNC(sc) while (sc) { \
asm(""); \
}
// Get SAMD port/pin from specified arduino pin
#define GET_SAMD_PORT(P) _GET_SAMD_PORT(PIN_TO_SAMD_PIN(P))
#define GET_SAMD_PIN(P) _GET_SAMD_PIN(PIN_TO_SAMD_PIN(P))
// Get external interrupt line associated to specified arduino pin
#define PIN_TO_EILINE(P) _SAMDPORTPIN_TO_EILINE(GET_SAMD_PORT(P), GET_SAMD_PIN(P))
// Get adc/ain associated to specified arduino pin
#define PIN_TO_ADC(P) (ANAPIN_TO_ADCAIN(P) >> 8)
#define PIN_TO_AIN(P) (ANAPIN_TO_ADCAIN(P) & 0xFF)
// Private defines
#define PIN_TO_SAMD_PIN(P) DIO##P##_PIN
#define _GET_SAMD_PORT(P) ((P) >> 5)
#define _GET_SAMD_PIN(P) ((P) & 0x1F)
// Get external interrupt line
#define _SAMDPORTPIN_TO_EILINE(P,B) ((P == 0 && WITHIN(B, 0, 31) && B != 8 && B != 26 && B != 28 && B != 29) ? (B) & 0xF \
: (P == 1 && (WITHIN(B, 0, 25) || WITHIN(B, 30, 31))) ? (B) & 0xF \
: (P == 1 && WITHIN(B, 26, 29)) ? 12 + (B) - 26 \
: (P == 2 && (WITHIN(B, 0, 6) || WITHIN(B, 10, 31)) && B != 29) ? (B) & 0xF \
: (P == 2 && B == 7) ? 9 \
: (P == 3 && WITHIN(B, 0, 1)) ? (B) \
: (P == 3 && WITHIN(B, 8, 12)) ? 3 + (B) - 8 \
: (P == 3 && WITHIN(B, 20, 21)) ? 10 + (B) - 20 \
: -1)
// Get adc/ain
#define ANAPIN_TO_ADCAIN(P) _PIN_TO_ADCAIN(ANAPIN_TO_SAMDPIN(P))
#define _PIN_TO_ADCAIN(P) _SAMDPORTPIN_TO_ADCAIN(_GET_SAMD_PORT(P), _GET_SAMD_PIN(P))
#define _SAMDPORTPIN_TO_ADCAIN(P,B) ((P == 0 && WITHIN(B, 2, 3)) ? 0x000 + (B) - 2 \
: (P == 0 && WITHIN(B, 4, 7)) ? 0x000 + (B) \
: (P == 0 && WITHIN(B, 8, 9)) ? 0x100 + 2 + (B) - 8 \
: (P == 0 && WITHIN(B, 10, 11)) ? 0x000 + (B) \
: (P == 1 && WITHIN(B, 0, 3)) ? 0x000 + 12 + (B) \
: (P == 1 && WITHIN(B, 4, 7)) ? 0x100 + 6 + (B) - 4 \
: (P == 1 && WITHIN(B, 8, 9)) ? 0x100 + (B) - 8 \
: (P == 2 && WITHIN(B, 0, 1)) ? 0x100 + 10 + (B) \
: (P == 2 && WITHIN(B, 2, 3)) ? 0x100 + 4 + (B) - 2 \
: (P == 2 && WITHIN(B, 30, 31)) ? 0x100 + 12 + (B) - 30 \
: (P == 3 && WITHIN(B, 0, 1)) ? 0x100 + 14 + (B) \
: -1)

48
Marlin/src/HAL/HAL_SAMD51/SanityCheck.h Normal file
View File

@ -0,0 +1,48 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Test SAMD51 specific configuration values for errors at compile-time.
*/
#if defined(ADAFRUIT_GRAND_CENTRAL_M4) && SD_CONNECTION_IS(CUSTOM_CABLE)
#error "No custom SD drive cable defined for this board."
#endif
#if defined(MAX6675_SCK_PIN) && defined(MAX6675_DO_PIN) && (MAX6675_SCK_PIN == SCK1 || MAX6675_DO_PIN == MISO1)
#error "OnBoard SPI BUS can't be shared with other devices."
#endif
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for STM32F4. Disable EMERGENCY_PARSER to continue."
#endif
#if ENABLED(SDIO_SUPPORT)
#error "SDIO_SUPPORT is not supported."
#endif
#if ENABLED(FAST_PWM_FAN)
#error "FAST_PWM_FAN is not yet implemented for this platform."
#endif
#if ENABLED(EEPROM_SETTINGS) && NONE(SPI_EEPROM, I2C_EEPROM)
#warning "Did you activate the SmartEEPROM? See https://github.com/GMagician/SAMD51-SmartEEprom-Activator"
#endif

59
Marlin/src/HAL/HAL_SAMD51/Tone.cpp Normal file
View File

@ -0,0 +1,59 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Description: Tone function for Arduino Due and compatible (SAM3X8E)
* Derived from http://forum.arduino.cc/index.php?topic=136500.msg2903012#msg2903012
*/
#ifdef __SAMD51__
#include "../../inc/MarlinConfig.h"
#include "HAL_timers_SAMD51.h"
static pin_t tone_pin;
volatile static int32_t toggles;
void tone(const pin_t _pin, const unsigned int frequency, const unsigned long duration) {
tone_pin = _pin;
toggles = 2 * frequency * duration / 1000;
HAL_timer_start(TONE_TIMER_NUM, 2 * frequency);
}
void noTone(const pin_t _pin) {
HAL_timer_disable_interrupt(TONE_TIMER_NUM);
extDigitalWrite(_pin, LOW);
}
HAL_TONE_TIMER_ISR() {
static bool pin_state = false;
HAL_timer_isr_prologue(TONE_TIMER_NUM);
if (toggles) {
toggles--;
extDigitalWrite(tone_pin, (pin_state = !pin_state));
}
else noTone(tone_pin); // turn off interrupt
HAL_timer_isr_epilogue(TONE_TIMER_NUM);
}
#endif // __SAMD51__

184
Marlin/src/HAL/HAL_SAMD51/endstop_interrupts.h Normal file
View File

@ -0,0 +1,184 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Endstop interrupts for ATMEL SAMD51 based targets.
*
* On SAMD51, all pins support external interrupt capability.
* Any pin can be used for external interrupts, but there are some restrictions.
* At most 16 different external interrupts can be used at one time.
* Further, you can’t just pick any 16 pins to use. This is because every pin on the SAMD51
* connects to what is called an EXTINT line, and only one pin per EXTINT line can be used for external
* interrupts at a time
*/
/**
* Endstop Interrupts
*
* Without endstop interrupts the endstop pins must be polled continually in
* the temperature-ISR via endstops.update(), most of the time finding no change.
* With this feature endstops.update() is called only when we know that at
* least one endstop has changed state, saving valuable CPU cycles.
*
* This feature only works when all used endstop pins can generate an 'external interrupt'.
*
* Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
* (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
*/
#include "../../module/endstops.h"
#define MATCH_EILINE(P1,P2) (P1 != P2 && PIN_TO_EILINE(P1) == PIN_TO_EILINE(P2))
#if HAS_X_MAX
#define MATCH_X_MAX_EILINE(P) MATCH_EILINE(P, X_MAX_PIN)
#else
#define MATCH_X_MAX_EILINE(P) false
#endif
#if HAS_X_MIN
#define MATCH_X_MIN_EILINE(P) MATCH_EILINE(P, X_MIN_PIN)
#else
#define MATCH_X_MIN_EILINE(P) false
#endif
#if HAS_Y_MAX
#define MATCH_Y_MAX_EILINE(P) MATCH_EILINE(P, Y_MAX_PIN)
#else
#define MATCH_Y_MAX_EILINE(P) false
#endif
#if HAS_Y_MIN
#define MATCH_Y_MIN_EILINE(P) MATCH_EILINE(P, Y_MIN_PIN)
#else
#define MATCH_Y_MIN_EILINE(P) false
#endif
#if HAS_Z_MAX
#define MATCH_Z_MAX_EILINE(P) MATCH_EILINE(P, Z_MAX_PIN)
#else
#define MATCH_Z_MAX_EILINE(P) false
#endif
#if HAS_Z_MIN
#define MATCH_Z_MIN_EILINE(P) MATCH_EILINE(P, Z_MIN_PIN)
#else
#define MATCH_Z_MIN_EILINE(P) false
#endif
#if HAS_Z2_MAX
#define MATCH_Z2_MAX_EILINE(P) MATCH_EILINE(P, Z2_MAX_PIN)
#else
#define MATCH_Z2_MAX_EILINE(P) false
#endif
#if HAS_Z2_MIN
#define MATCH_Z2_MIN_EILINE(P) MATCH_EILINE(P, Z2_MIN_PIN)
#else
#define MATCH_Z2_MIN_EILINE(P) false
#endif
#if HAS_Z3_MAX
#define MATCH_Z3_MAX_EILINE(P) MATCH_EILINE(P, Z3_MAX_PIN)
#else
#define MATCH_Z3_MAX_EILINE(P) false
#endif
#if HAS_Z3_MIN
#define MATCH_Z3_MIN_EILINE(P) MATCH_EILINE(P, Z3_MIN_PIN)
#else
#define MATCH_Z3_MIN_EILINE(P) false
#endif
#if HAS_Z_MIN_PROBE_PIN
#define MATCH_Z_MIN_PROBE_EILINE(P) MATCH_EILINE(P, Z_MIN_PROBE_PIN)
#else
#define MATCH_Z_MIN_PROBE_EILINE(P) false
#endif
#define AVAILABLE_EILINE(P) (PIN_TO_EILINE(P) != -1 \
&& !MATCH_X_MAX_EILINE(P) && !MATCH_X_MIN_EILINE(P) \
&& !MATCH_Y_MAX_EILINE(P) && !MATCH_Y_MIN_EILINE(P) \
&& !MATCH_Z_MAX_EILINE(P) && !MATCH_Z_MIN_EILINE(P) \
&& !MATCH_Z2_MAX_EILINE(P) && !MATCH_Z2_MIN_EILINE(P) \
&& !MATCH_Z3_MAX_EILINE(P) && !MATCH_Z3_MIN_EILINE(P) \
&& !MATCH_Z_MIN_PROBE_EILINE(P))
// One ISR for all EXT-Interrupts
void endstop_ISR(void) { endstops.update(); }
void setup_endstop_interrupts(void) {
#if HAS_X_MAX
#if !AVAILABLE_EILINE(X_MAX_PIN)
static_assert(false, "X_MAX_PIN has no EXTINT line available.");
#endif
attachInterrupt(X_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_X_MIN
#if !AVAILABLE_EILINE(X_MIN_PIN)
static_assert(false, "X_MIN_PIN has no EXTINT line available.");
#endif
attachInterrupt(X_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Y_MAX
#if !AVAILABLE_EILINE(Y_MAX_PIN)
static_assert(false, "Y_MAX_PIN has no EXTINT line available.");
#endif
attachInterrupt(Y_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Y_MIN
#if !AVAILABLE_EILINE(Y_MIN_PIN)
static_assert(false, "Y_MIN_PIN has no EXTINT line available.");
#endif
attachInterrupt(Y_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z_MAX
#if !AVAILABLE_EILINE(Z_MAX_PIN)
static_assert(false, "Z_MAX_PIN has no EXTINT line available.");
#endif
attachInterrupt(Z_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z_MIN
#if !AVAILABLE_EILINE(Z_MIN_PIN)
static_assert(false, "Z_MIN_PIN has no EXTINT line available.");
#endif
attachInterrupt(Z_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z2_MAX
#if !AVAILABLE_EILINE(Z2_MAX_PIN)
static_assert(false, "Z2_MAX_PIN has no EXTINT line available.");
#endif
attachInterrupt(Z2_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z2_MIN
#if !AVAILABLE_EILINE(Z2_MIN_PIN)
static_assert(false, "Z2_MIN_PIN has no EXTINT line available.");
#endif
attachInterrupt(Z2_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z3_MAX
#if !AVAILABLE_EILINE(Z3_MAX_PIN)
static_assert(false, "Z3_MAX_PIN has no EXTINT line available.");
#endif
attachInterrupt(Z3_MAX_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z3_MIN
#if !AVAILABLE_EILINE(Z3_MIN_PIN)
static_assert(false, "Z3_MIN_PIN has no EXTINT line available.");
#endif
attachInterrupt(Z3_MIN_PIN, endstop_ISR, CHANGE);
#endif
#if HAS_Z_MIN_PROBE_PIN
#if !AVAILABLE_EILINE(Z_MIN_PROBE_PIN)
static_assert(false, "Z_MIN_PROBE_PIN has no EXTINT line available.");
#endif
attachInterrupt(Z_MIN_PROBE_PIN, endstop_ISR, CHANGE);
#endif
}

251
Marlin/src/HAL/HAL_SAMD51/fastio_SAMD51.h Normal file
View File

@ -0,0 +1,251 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
/**
* Fast IO functions for SAMD51
*/
#include "SAMD51.h"
/**
* Utility functions
*/
#ifndef MASK
#define MASK(PIN) (1 << PIN)
#endif
/**
* Magic I/O routines
*
* Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
*/
// Read a pin
#define READ(IO) ((PORT->Group[(EPortType)GET_SAMD_PORT(IO)].IN.reg & MASK(GET_SAMD_PIN(IO))) != 0)
// Write to a pin
#define WRITE(IO,V) do{ \
const EPortType port = (EPortType)GET_SAMD_PORT(IO); \
const uint32_t mask = MASK(GET_SAMD_PIN(IO)); \
\
if (V) PORT->Group[port].OUTSET.reg = mask; \
else PORT->Group[port].OUTCLR.reg = mask; \
}while(0)
// Toggle a pin
#define TOGGLE(IO) PORT->Group[(EPortType)GET_SAMD_PORT(IO)].OUTTGL.reg = MASK(GET_SAMD_PIN(IO));
// Set pin as input
#define SET_INPUT(IO) do{ \
const EPortType port = (EPortType)GET_SAMD_PORT(IO); \
const uint32_t pin = GET_SAMD_PIN(IO); \
\
PORT->Group[port].PINCFG[pin].reg = (uint8_t)(PORT_PINCFG_INEN); \
PORT->Group[port].DIRCLR.reg = MASK(pin); \
}while(0)
// Set pin as input with pullup
#define SET_INPUT_PULLUP(IO) do{ \
const EPortType port = (EPortType)GET_SAMD_PORT(IO); \
const uint32_t pin = GET_SAMD_PIN(IO); \
const uint32_t mask = MASK(pin); \
\
PORT->Group[port].PINCFG[pin].reg = (uint8_t)(PORT_PINCFG_INEN | PORT_PINCFG_PULLEN); \
PORT->Group[port].DIRCLR.reg = mask; \
PORT->Group[port].OUTSET.reg = mask; \
}while(0)
// Set pin as input with pulldown
#define SET_INPUT_PULLDOWN(IO) do{ \
const EPortType port = (EPortType)GET_SAMD_PORT(IO); \
const uint32_t pin = GET_SAMD_PIN(IO); \
const uint32_t mask = MASK(pin); \
\
PORT->Group[port].PINCFG[pin].reg = (uint8_t)(PORT_PINCFG_INEN | PORT_PINCFG_PULLEN); \
PORT->Group[port].DIRCLR.reg = mask; \
PORT->Group[port].OUTCLR.reg = mask; \
}while(0)
// Set pin as output (push pull)
#define SET_OUTPUT(IO) do{ \
const EPortType port = (EPortType)GET_SAMD_PORT(IO); \
const uint32_t pin = GET_SAMD_PIN(IO); \
\
PORT->Group[port].PINCFG[pin].reg = (uint8_t)(PORT_PINCFG_INEN); \
PORT->Group[port].DIRSET.reg = MASK(pin); \
}while(0)
// Set pin as output (open drain)
#define SET_OUTPUT_OD(IO) do{ \
const EPortType port = (EPortType)GET_SAMD_PORT(IO); \
const uint32_t pin = GET_SAMD_PIN(IO); \
\
PORT->Group[port].PINCFG[pin].reg = (uint8_t)(PORT_PINCFG_PULLEN); \
PORT->Group[port].DIRCLR.reg = MASK(pin); \
}while(0)
// Set pin as PWM (push pull)
#define SET_PWM(IO) SET_OUTPUT(IO)
// Set pin as PWM (open drain)
#define SET_PWM_OD(IO) SET_OUTPUT_OD(IO)
// check if pin is an output
#define IS_OUTPUT(IO) ((PORT->Group[(EPortType)GET_SAMD_PORT(IO)].DIR.reg & MASK(GET_SAMD_PIN(IO))) \
|| (PORT->Group[(EPortType)GET_SAMD_PORT(IO)].PINCFG[GET_SAMD_PIN(IO)].reg & (PORT_PINCFG_INEN | PORT_PINCFG_PULLEN)) == PORT_PINCFG_PULLEN)
// check if pin is an input
#define IS_INPUT(IO) !IS_OUTPUT(IO)
// Shorthand
#define OUT_WRITE(IO,V) do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
#define OUT_WRITE_OD(IO,V) do{ SET_OUTPUT_OD(IO); WRITE(IO,V); }while(0)
// digitalRead/Write wrappers
#define extDigitalRead(IO) digitalRead(IO)
#define extDigitalWrite(IO,V) digitalWrite(IO,V)
/**
* Ports and functions
* Added as necessary or if I feel like it- not a comprehensive list!
*/
#ifdef ADAFRUIT_GRAND_CENTRAL_M4
/*
* Adafruit Grand Central M4 has a lot of PWMs the availables are listed here.
* Some of these share the same source and so can't be used in the same time
*/
#define PWM_PIN(P) (WITHIN(P, 2, 13) || WITHIN(P, 22, 23) || WITHIN(P, 44, 45) || P == 48)
// Return fullfilled ADCx->INPUTCTRL.reg
#define PIN_TO_INPUTCTRL(P) ( (PIN_TO_AIN(P) == 0) ? ADC_INPUTCTRL_MUXPOS_AIN0 \
: (PIN_TO_AIN(P) == 1) ? ADC_INPUTCTRL_MUXPOS_AIN1 \
: (PIN_TO_AIN(P) == 2) ? ADC_INPUTCTRL_MUXPOS_AIN2 \
: (PIN_TO_AIN(P) == 3) ? ADC_INPUTCTRL_MUXPOS_AIN3 \
: (PIN_TO_AIN(P) == 4) ? ADC_INPUTCTRL_MUXPOS_AIN4 \
: (PIN_TO_AIN(P) == 5) ? ADC_INPUTCTRL_MUXPOS_AIN5 \
: (PIN_TO_AIN(P) == 6) ? ADC_INPUTCTRL_MUXPOS_AIN6 \
: (PIN_TO_AIN(P) == 7) ? ADC_INPUTCTRL_MUXPOS_AIN7 \
: (PIN_TO_AIN(P) == 8) ? ADC_INPUTCTRL_MUXPOS_AIN8 \
: (PIN_TO_AIN(P) == 9) ? ADC_INPUTCTRL_MUXPOS_AIN9 \
: (PIN_TO_AIN(P) == 10) ? ADC_INPUTCTRL_MUXPOS_AIN10 \
: (PIN_TO_AIN(P) == 11) ? ADC_INPUTCTRL_MUXPOS_AIN11 \
: (PIN_TO_AIN(P) == 12) ? ADC_INPUTCTRL_MUXPOS_AIN12 \
: (PIN_TO_AIN(P) == 13) ? ADC_INPUTCTRL_MUXPOS_AIN13 \
: (PIN_TO_AIN(P) == 14) ? ADC_INPUTCTRL_MUXPOS_AIN14 \
: ADC_INPUTCTRL_MUXPOS_AIN15)
#define ANAPIN_TO_SAMDPIN(P) ( (P == 0) ? PIN_TO_SAMD_PIN(67) \
: (P == 1) ? PIN_TO_SAMD_PIN(68) \
: (P == 2) ? PIN_TO_SAMD_PIN(69) \
: (P == 3) ? PIN_TO_SAMD_PIN(70) \
: (P == 4) ? PIN_TO_SAMD_PIN(71) \
: (P == 5) ? PIN_TO_SAMD_PIN(72) \
: (P == 6) ? PIN_TO_SAMD_PIN(73) \
: (P == 7) ? PIN_TO_SAMD_PIN(74) \
: (P == 8) ? PIN_TO_SAMD_PIN(54) \
: (P == 9) ? PIN_TO_SAMD_PIN(55) \
: (P == 10) ? PIN_TO_SAMD_PIN(56) \
: (P == 11) ? PIN_TO_SAMD_PIN(57) \
: (P == 12) ? PIN_TO_SAMD_PIN(58) \
: (P == 13) ? PIN_TO_SAMD_PIN(59) \
: (P == 14) ? PIN_TO_SAMD_PIN(60) \
: (P == 15) ? PIN_TO_SAMD_PIN(61) \
: (P == 16) ? PIN_TO_SAMD_PIN(12) \
: (P == 17) ? PIN_TO_SAMD_PIN(13) \
: PIN_TO_SAMD_PIN(9))
#define digitalPinToAnalogInput(P) (WITHIN(P, 67, 74) ? (P) - 67 : WITHIN(P, 54, 61) ? 8 + (P) - 54 : WITHIN(P, 12, 13) ? 16 + (P) - 12 : P == 9 ? 18 : -1)
/*
* pins
*/
// PORTA
#define DIO67_PIN PIN_PA02 // A0
#define DIO59_PIN PIN_PA04 // A13
#define DIO68_PIN PIN_PA05 // A1
#define DIO60_PIN PIN_PA06 // A14
#define DIO61_PIN PIN_PA07 // A15
#define DIO26_PIN PIN_PA12
#define DIO27_PIN PIN_PA13
#define DIO28_PIN PIN_PA14
#define DIO23_PIN PIN_PA15
#define DIO37_PIN PIN_PA16
#define DIO36_PIN PIN_PA17
#define DIO35_PIN PIN_PA18
#define DIO34_PIN PIN_PA19
#define DIO33_PIN PIN_PA20
#define DIO32_PIN PIN_PA21
#define DIO31_PIN PIN_PA22
#define DIO30_PIN PIN_PA23
// PORTB
#define DIO12_PIN PIN_PB00 // A16
#define DIO13_PIN PIN_PB01 // A17
#define DIO9_PIN PIN_PB02 // A18
#define DIO69_PIN PIN_PB03 // A2
#define DIO74_PIN PIN_PB04 // A7
#define DIO54_PIN PIN_PB05 // A8
#define DIO55_PIN PIN_PB06 // A9
#define DIO56_PIN PIN_PB07 // A10
#define DIO57_PIN PIN_PB08 // A11
#define DIO58_PIN PIN_PB09 // A12
#define DIO18_PIN PIN_PB12
#define DIO19_PIN PIN_PB13
#define DIO39_PIN PIN_PB14
#define DIO38_PIN PIN_PB15
#define DIO14_PIN PIN_PB16
#define DIO15_PIN PIN_PB17
#define DIO8_PIN PIN_PB18
#define DIO29_PIN PIN_PB19
#define DIO20_PIN PIN_PB20
#define DIO21_PIN PIN_PB21
#define DIO10_PIN PIN_PB22
#define DIO11_PIN PIN_PB23
#define DIO1_PIN PIN_PB24
#define DIO0_PIN PIN_PB25
#define DIO83_PIN PIN_PB28 // SD_CS
#define DIO95_PIN PIN_PB31 // SD_CD
// PORTC
#define DIO70_PIN PIN_PC00 // A3
#define DIO71_PIN PIN_PC01 // A4
#define DIO72_PIN PIN_PC02 // A5
#define DIO73_PIN PIN_PC03 // A6
#define DIO48_PIN PIN_PC04
#define DIO49_PIN PIN_PC05
#define DIO46_PIN PIN_PC06
#define DIO47_PIN PIN_PC07
#define DIO45_PIN PIN_PC10
#define DIO44_PIN PIN_PC11
#define DIO41_PIN PIN_PC12
#define DIO40_PIN PIN_PC13
#define DIO43_PIN PIN_PC14
#define DIO42_PIN PIN_PC15
#define DIO25_PIN PIN_PC16
#define DIO24_PIN PIN_PC17
#define DIO2_PIN PIN_PC18
#define DIO3_PIN PIN_PC19
#define DIO4_PIN PIN_PC20
#define DIO5_PIN PIN_PC21
#define DIO16_PIN PIN_PC22
#define DIO17_PIN PIN_PC23
// PORTD
#define DIO22_PIN PIN_PD12
#define DIO6_PIN PIN_PD20
#define DIO7_PIN PIN_PD21
#endif // ADAFRUIT_GRAND_CENTRAL_M4

129
Marlin/src/HAL/HAL_SAMD51/persistent_store_eeprom.cpp Normal file
View File

@ -0,0 +1,129 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef __SAMD51__
#include "../../inc/MarlinConfig.h"
#if ENABLED(EEPROM_SETTINGS)
#include "../shared/persistent_store_api.h"
#if NONE(SPI_EEPROM, I2C_EEPROM)
#define NVMCTRL_CMD(c) do{ \
SYNC(!NVMCTRL->STATUS.bit.READY); \
NVMCTRL->INTFLAG.bit.DONE = true; \
NVMCTRL->CTRLB.reg = c | NVMCTRL_CTRLB_CMDEX_KEY; \
SYNC(NVMCTRL->INTFLAG.bit.DONE); \
}while(0)
#define NVMCTRL_FLUSH() do{ \
if (NVMCTRL->SEESTAT.bit.LOAD) \
NVMCTRL_CMD(NVMCTRL_CTRLB_CMD_SEEFLUSH); \
}while(0)
#endif
bool PersistentStore::access_start() {
#if NONE(SPI_EEPROM, I2C_EEPROM)
NVMCTRL->SEECFG.reg = NVMCTRL_SEECFG_WMODE_BUFFERED; // Buffered mode and segment reallocation active
#endif
return true;
}
bool PersistentStore::access_finish() {
#if NONE(SPI_EEPROM, I2C_EEPROM)
NVMCTRL_FLUSH();
if (!NVMCTRL->SEESTAT.bit.LOCK)
NVMCTRL_CMD(NVMCTRL_CTRLB_CMD_LSEE); // Lock E2P data write access
#endif
return true;
}
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
#if NONE(SPI_EEPROM, I2C_EEPROM)
if (NVMCTRL->SEESTAT.bit.RLOCK)
NVMCTRL_CMD(NVMCTRL_CTRLB_CMD_USEE); // Unlock E2P data write access
#endif
while (size--) {
const uint8_t v = *value;
#if ANY(SPI_EEPROM, I2C_EEPROM)
uint8_t * const p = (uint8_t * const)pos;
if (v != eeprom_read_byte(p)) {
eeprom_write_byte(p, v);
delay(2);
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
return true;
}
}
#else
SYNC(NVMCTRL->SEESTAT.bit.BUSY);
if (NVMCTRL->INTFLAG.bit.SEESFULL)
NVMCTRL_FLUSH(); // Next write will trigger a sector reallocation. I need to flush 'pagebuffer'
((volatile uint8_t *)SEEPROM_ADDR)[pos] = v;
SYNC(!NVMCTRL->INTFLAG.bit.SEEWRC);
#endif
crc16(crc, &v, 1);
pos++;
value++;
}
return false;
}
bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
while (size--) {
uint8_t c;
#if ANY(SPI_EEPROM, I2C_EEPROM)
c = eeprom_read_byte((uint8_t*)pos);
#else
SYNC(NVMCTRL->SEESTAT.bit.BUSY);
c = ((volatile uint8_t *)SEEPROM_ADDR)[pos];
#endif
if (writing) *value = c;
crc16(crc, &c, 1);
pos++;
value++;
}
return false;
}
size_t PersistentStore::capacity() {
#if ANY(SPI_EEPROM, I2C_EEPROM)
return E2END + 1;
#else
const uint8_t psz = NVMCTRL->SEESTAT.bit.PSZ,
sblk = NVMCTRL->SEESTAT.bit.SBLK;
if (!psz && !sblk) return 0;
else if (psz <= 2) return (0x200 << psz);
else if (sblk == 1 || psz == 3) return 4096;
else if (sblk == 2 || psz == 4) return 8192;
else if (sblk <= 4 || psz == 5) return 16384;
else if (sblk >= 9 && psz == 7) return 65536;
else return 32768;
#endif
}
#endif // EEPROM_SETTINGS
#endif // __SAMD51__

153
Marlin/src/HAL/HAL_SAMD51/pinsDebug.h Normal file
View File

@ -0,0 +1,153 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#define NUMBER_PINS_TOTAL PINS_COUNT
#define digitalRead_mod(p) extDigitalRead(p)
#define PRINT_PORT(p) do{ SERIAL_ECHOPGM(" Port: "); sprintf_P(buffer, PSTR("%c%02ld"), 'A' + g_APinDescription[p].ulPort, g_APinDescription[p].ulPin); SERIAL_ECHO(buffer); }while (0)
#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
#define GET_ARRAY_PIN(p) pin_array[p].pin
#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
#define VALID_PIN(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL)
#define DIGITAL_PIN_TO_ANALOG_PIN(p) digitalPinToAnalogInput(p)
#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P)!=-1)
#define pwm_status(pin) digitalPinHasPWM(pin)
#define MULTI_NAME_PAD 27 // space needed to be pretty if not first name assigned to a pin
// pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities
// uses pin index
#define M43_NEVER_TOUCH(Q) ((Q) >= 75)
bool GET_PINMODE(int8_t pin) { // 1: output, 0: input
const EPortType samdport = g_APinDescription[pin].ulPort;
const uint32_t samdpin = g_APinDescription[pin].ulPin;
return PORT->Group[samdport].DIR.reg & MASK(samdpin) || (PORT->Group[samdport].PINCFG[samdpin].reg & (PORT_PINCFG_INEN | PORT_PINCFG_PULLEN)) == PORT_PINCFG_PULLEN;
}
void pwm_details(int32_t pin) {
if (pwm_status(pin)) {
//uint32_t chan = g_APinDescription[pin].ulPWMChannel TODO when fast pwm is operative;
//SERIAL_ECHOPAIR("PWM = ", duty);
}
}
/**
* AGCM4 Board pin | PORT | Label
* ----------------+--------+-------
* 0 | PB25 | "RX0"
* 1 | PB24 | "TX0"
* 2 | PC18 |
* 3 | PC19 |
* 4 | PC20 |
* 5 | PC21 |
* 6 | PD20 |
* 7 | PD21 |
* 8 | PB18 |
* 9 | PB2 |
* 10 | PB22 |
* 11 | PB23 |
* 12 | PB0 | "A16"
* 13 | PB1 | LED AMBER "L" / "A17"
* 14 | PB16 | "TX3"
* 15 | PB17 | "RX3"
* 16 | PC22 | "TX2"
* 17 | PC23 | "RX2"
* 18 | PB12 | "TX1" / "A18"
* 19 | PB13 | "RX1"
* 20 | PB20 | "SDA"
* 21 | PB21 | "SCL"
* 22 | PD12 |
* 23 | PA15 |
* 24 | PC17 |
* 25 | PC16 |
* 26 | PA12 |
* 27 | PA13 |
* 28 | PA14 |
* 29 | PB19 |
* 30 | PA23 |
* 31 | PA22 |
* 32 | PA21 |
* 33 | PA20 |
* 34 | PA19 |
* 35 | PA18 |
* 36 | PA17 |
* 37 | PA16 |
* 38 | PB15 |
* 39 | PB14 |
* 40 | PC13 |
* 41 | PC12 |
* 42 | PC15 |
* 43 | PC14 |
* 44 | PC11 |
* 45 | PC10 |
* 46 | PC6 |
* 47 | PC7 |
* 48 | PC4 |
* 49 | PC5 |
* 50 | PD11 |
* 51 | PD8 |
* 52 | PD9 |
* 53 | PD10 |
* 54 | PB5 | "A8"
* 55 | PB6 | "A9"
* 56 | PB7 | "A10"
* 57 | PB8 | "A11"
* 58 | PB9 | "A12"
* 69 | PA4 | "A13"
* 60 | PA6 | "A14"
* 61 | PA7 | "A15"
* 62 | PB17 |
* 63 | PB20 |
* 64 | PD11 |
* 65 | PD8 |
* 66 | PD9 |
* 67 | PA2 | "A0" / "DAC0"
* 68 | PA5 | "A1" / "DAC1"
* 69 | PB3 | "A2"
* 70 | PC0 | "A3"
* 71 | PC1 | "A4"
* 72 | PC2 | "A5"
* 73 | PC3 | "A6"
* 74 | PB4 | "A7"
* 75 | PC31 | LED GREEN "RX"
* 76 | PC30 | LED GREEN "TX"
* 77 | PA27 | USB: Host enable
* 78 | PA24 | USB: D-
* 79 | PA25 | USB: D+
* 80 | PB29 | SD: MISO
* 81 | PB27 | SD: SCK
* 82 | PB26 | SD: MOSI
* 83 | PB28 | SD: CS
* 84 | PA3 | AREF
* 85 | PA2 | DAC0 (Duplicate)
* 86 | PA5 | DAC1 (Duplicate)
* 87 | PB1 | LED AMBER "L" (Duplicate)
* 88 | PC24 | NeoPixel
* 89 | PB10 | QSPI: SCK
* 90 | PB11 | QSPI: CS
* 91 | PA8 | QSPI: IO0
* 92 | PA9 | QSPI: IO1
* 93 | PA10 | QSPI: IO2
* 94 | PA11 | QSPI: IO3
*
*/

54
Marlin/src/HAL/HAL_SAMD51/spi_pins.h Normal file
View File

@ -0,0 +1,54 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
#ifdef ADAFRUIT_GRAND_CENTRAL_M4
/*
* AGCM4 Default SPI Pins
*
* SS SCK MISO MOSI
* +-------------------------+
* SPI | 53 52 50 51 |
* SPI1 | 83 81 80 82 |
* +-------------------------+
* Any pin can be used for Chip Select (SS_PIN)
*/
#ifndef SCK_PIN
#define SCK_PIN 52
#endif
#ifndef MISO_PIN
#define MISO_PIN 50
#endif
#ifndef MOSI_PIN
#define MOSI_PIN 51
#endif
#ifndef SDSS
#define SDSS 53
#endif
#else
#error "Unsupported board!"
#endif
#define SS_PIN SDSS

53
Marlin/src/HAL/HAL_SAMD51/watchdog_SAMD51.cpp Normal file
View File

@ -0,0 +1,53 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#ifdef __SAMD51__
#include "../../inc/MarlinConfig.h"
#if ENABLED(USE_WATCHDOG)
#include "watchdog_SAMD51.h"
void watchdog_init(void) {
// The low-power oscillator used by the WDT runs at 32,768 Hz with
// a 1:32 prescale, thus 1024 Hz, though probably not super precise.
// Setup WDT clocks
MCLK->APBAMASK.bit.OSC32KCTRL_ = true;
MCLK->APBAMASK.bit.WDT_ = true;
OSC32KCTRL->OSCULP32K.bit.EN1K = true; // Enable out 1K (this is what WDT uses)
WDT->CTRLA.bit.ENABLE = false; // Disable watchdog for config
SYNC(WDT->SYNCBUSY.bit.ENABLE);
WDT->INTENCLR.reg = WDT_INTENCLR_EW; // Disable early warning interrupt
WDT->CONFIG.reg = WDT_CONFIG_PER_CYC4096; // Set at least 4s period for chip reset
watchdog_reset();
WDT->CTRLA.reg = WDT_CTRLA_ENABLE; // Start watchdog now in normal mode
SYNC(WDT->SYNCBUSY.bit.ENABLE);
}
#endif // USE_WATCHDOG
#endif // __SAMD51__

31
Marlin/src/HAL/HAL_SAMD51/watchdog_SAMD51.h Normal file
View File

@ -0,0 +1,31 @@
/**
* Marlin 3D Printer Firmware
*
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
* SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#pragma once
// Initialize watchdog with a 4 second interrupt time
void watchdog_init();
// Reset watchdog. MUST be called at least every 4 seconds after the
// first watchdog_init or SAMD will go into emergency procedures.
inline void watchdog_reset() {
SYNC(WDT->SYNCBUSY.bit.CLEAR); // Test first if previous is 'ongoing' to save time waiting for command execution
WDT->CLEAR.reg = WDT_CLEAR_CLEAR_KEY;
}

11
Marlin/src/HAL/shared/backtrace/unwmemaccess.cpp
View File

@ -129,6 +129,17 @@
#define END_FLASH_ADDR 0x00140000
#endif
#ifdef __SAMD51P20A__
// For SAMD51x20, valid address ranges are
// SRAM (0x20000000 - 0x20040000) (256kb)
// FLASH (0x00000000 - 0x00100000) (1024kb)
//
#define START_SRAM_ADDR 0x20000000
#define END_SRAM_ADDR 0x20040000
#define START_FLASH_ADDR 0x00000000
#define END_FLASH_ADDR 0x00100000
#endif
static bool validate_addr(uint32_t addr) {
// Address must be in SRAM range

5
Marlin/src/core/boards.h
View File

@ -302,6 +302,11 @@
//
#define BOARD_ESP32 6000
//
// SAMD51 ARM Cortex M4
//
#define BOARD_AGCM4_RURAMPS4D_13 6100
//
// Simulations
//

2
Marlin/src/core/drivers.h
View File

@ -120,7 +120,7 @@
|| AXIS_DRIVER_TYPE(A,TMC5160) )
//
// Stretching 'drivers.h' to include LPC SD options
// Stretching 'drivers.h' to include LPC/SAMD51 SD options
//
#define _SDCARD_LCD 1
#define _SDCARD_ONBOARD 2

16
Marlin/src/gcode/calibrate/M100.cpp
View File

@ -75,7 +75,7 @@
char *end_bss = &__bss_end__,
*stacklimit = &__StackLimit,
*heaplimit = &__HeapLimit ;
*heaplimit = &__HeapLimit;
#define MEMORY_END_CORRECTION 0x200
@ -94,6 +94,20 @@
#define MEMORY_END_CORRECTION 0x10000 // need to stay well below 0x20080000 or M100 F crashes
#elif defined(__SAMD51__)
extern unsigned int __bss_end__, __StackLimit, __HeapLimit;
extern "C" void * _sbrk(int incr);
void *end_bss = &__bss_end__,
*stacklimit = &__StackLimit,
*heaplimit = &__HeapLimit;
#define MEMORY_END_CORRECTION 0x400
char *free_memory_start = (char *)_sbrk(0) + 0x200, // Leave some heap space
*free_memory_end = (char *)stacklimit - MEMORY_END_CORRECTION;
#else
#error "M100 - unsupported CPU"
#endif

2
Marlin/src/inc/Conditionals_LCD.h
View File

@ -605,3 +605,5 @@
#endif
#define IS_RE_ARM_BOARD (MB(RAMPS_14_RE_ARM_EFB) || MB(RAMPS_14_RE_ARM_EEB) || MB(RAMPS_14_RE_ARM_EFF) || MB(RAMPS_14_RE_ARM_EEF) || MB(RAMPS_14_RE_ARM_SF))
#define HAS_SDCARD_CONNECTION EITHER(TARGET_LPC1768, ADAFRUIT_GRAND_CENTRAL_M4)

7
Marlin/src/pins/pins.h
View File

@ -515,6 +515,13 @@
#elif MB(ESP32)
#include "esp32/pins_ESP32.h" // ESP32 env:esp32
//
// Adafruit Grand Central M4 (SAMD51 ARM Cortex-M4)
//
#elif MB(AGCM4_RURAMPS4D_13)
#include "samd/pins_AGCM4_RURAMPS4D_13.h" // SAMD51 env:adafruit_grandcentral_m4
//
// Linux Native Debug board
//

2
Marlin/src/pins/pinsDebug_list.h
View File

@ -51,7 +51,7 @@
#if PIN_EXISTS(MAIN_VOLTAGE_MEASURE) && MAIN_VOLTAGE_MEASURE_PIN < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(__LINE__, MAIN_VOLTAGE_MEASURE_PIN)
#endif
#if !defined(ARDUINO_ARCH_SAM) //TC1 & TC2 are macros in the SAM tool chain
#if !defined(ARDUINO_ARCH_SAM) && !defined(ARDUINO_ARCH_SAMD) //TC1 & TC2 are macros in the SAM/SAMD tool chain
#if defined(TC1) && TC1 >= 0 && TC1 < NUM_ANALOG_INPUTS
REPORT_NAME_ANALOG(__LINE__, TC1)
#endif

254
Marlin/src/pins/samd/pins_AGCM4_RURAMPS4D_13.h Normal file
View File

@ -0,0 +1,254 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
/**
* Adafruit Grand Central M4 pin assignments ported by Giuliano Zaro
*/
#ifndef ARDUINO_GRAND_CENTRAL_M4
#error "Oops! Select 'Adafruit Grand Central M4' in 'Tools > Board.'"
#endif
#define BOARD_NAME "RuRAMPS4AGCM4 v1.3"
//
// Servos
//
#define SERVO0_PIN 5
#define SERVO1_PIN 3
//
// Limit Switches
//
#define X_MIN_PIN 45
#define X_MAX_PIN 39
#define Y_MIN_PIN 46
#define Y_MAX_PIN 41
#define Z_MIN_PIN 47
#define Z_MAX_PIN 43
//
// Z Probe (when not Z_MIN_PIN)
//
#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN 49
#endif
//
// Steppers
//
#define X_STEP_PIN 37 // Support Extension Board
#define X_DIR_PIN 36
#define X_ENABLE_PIN 31
#ifndef X_CS_PIN
#define X_CS_PIN 38
#endif
#define Y_STEP_PIN 32 // Support Extension Board
#define Y_DIR_PIN 35
#define Y_ENABLE_PIN 31
#ifndef Y_CS_PIN
#define Y_CS_PIN 34
#endif
#define Z_STEP_PIN 30 // Support Extension Board
#define Z_DIR_PIN 2
#define Z_ENABLE_PIN 31
#ifndef Z_CS_PIN
#define Z_CS_PIN 10
#endif
#define E0_STEP_PIN 29
#define E0_DIR_PIN 28
#define E0_ENABLE_PIN 33
#ifndef E0_CS_PIN
#define E0_CS_PIN 14
#endif
#define E1_STEP_PIN 22
#define E1_DIR_PIN 24
#define E1_ENABLE_PIN 26
#ifndef E1_CS_PIN
#define E1_CS_PIN 15
#endif
#define E2_STEP_PIN 25
#define E2_DIR_PIN 23
#define E2_ENABLE_PIN 27
#ifndef E2_CS_PIN
#define E2_CS_PIN 74
#endif
#if USES_Z_MIN_PROBE_ENDSTOP
#define Z_MIN_PROBE_PIN 49
#endif
#if HAS_FILAMENT_SENSOR
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN Y_MIN_PIN
#endif
#endif
//
// Heaters / Fans
//
#define HEATER_0_PIN 13
#define HEATER_1_PIN 12
#define HEATER_2_PIN 11
#define HEATER_BED_PIN 7 // BED H1
#define FAN_PIN 9
#define FAN1_PIN 8
#define CONTROLLER_FAN_PIN -1
//
// Temperature Sensors
//
#define TEMP_0_PIN 0 // ANALOG A0
#define TEMP_1_PIN 1 // ANALOG A1
#define TEMP_2_PIN 2 // ANALOG A2
#define TEMP_3_PIN 3 // ANALOG A3
#define TEMP_BED_PIN 4 // ANALOG A4
// The thermocouple uses Analog pins
#if ENABLED(VER_WITH_THERMOCOUPLE) // Must be defined in Configuration.h
#define TEMP_4_PIN 5 // A5
#define TEMP_5_PIN 6 // A6 (Marlin 2.0 not support)
#endif
// SPI for Max6675 or Max31855 Thermocouple
/*
#if DISABLED(SDSUPPORT)
#define MAX6675_SS_PIN 53
#else
#define MAX6675_SS_PIN 49
#endif
*/
//
// Misc. Functions
//
#define SDSS 4
#define LED_PIN -1 // 13 - HEATER_0_PIN
#define PS_ON_PIN -1 // 57
// MKS TFT / Nextion Use internal USART-1
#define TFT_LCD_MODULE_COM 1
#define TFT_LCD_MODULE_BAUDRATE 115200
// ESP WiFi Use internal USART-2
#define ESP_WIFI_MODULE_COM 2
#define ESP_WIFI_MODULE_BAUDRATE 115200
#define ESP_WIFI_MODULE_RESET_PIN -1
#define PIGGY_GPIO_PIN -1
//
// EEPROM
//
#define E2END 0x7FFF // 32Kb (24lc256)
#define I2C_EEPROM // EEPROM on I2C
//
// LCD / Controller
//
#if HAS_SPI_LCD
#if EITHER(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER)
#define BEEPER_PIN 75
#define LCD_PINS_D4 48
#define LCD_PINS_D7 53
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define LCD_PINS_RS 76
#define LCD_PINS_ENABLE 77
#elif ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER)
#define BEEPER_PIN 75
#define LCD_PINS_D4 48
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#define LCD_PINS_RS 76
#define LCD_PINS_ENABLE 77
#elif HAS_SSD1306_OLED_I2C
#define BEEPER_PIN 75
#define LCD_SDSS 10
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#elif ENABLED(FYSETC_MINI_12864)
#define BEEPER_PIN 75
#define DOGLCD_CS 77
#define DOGLCD_A0 76
//#define FORCE_SOFT_SPI // Use this if default of hardware SPI causes display problems
// results in LCD soft SPI mode 3, SD soft SPI mode 0
#define LCD_RESET_PIN 48 // Must be high or open for LCD to operate normally.
#if EITHER(FYSETC_MINI_12864_1_2, FYSETC_MINI_12864_2_0)
#error "Pin compatibility check needed! Grand central M4 pins 50, 51 and 52 are not GPIO pins, they are wired to MISO, MOSI, and SCK."
#ifndef RGB_LED_R_PIN
#define RGB_LED_R_PIN 50 // D5
#endif
#ifndef RGB_LED_G_PIN
#define RGB_LED_G_PIN 52 // D6
#endif
#ifndef RGB_LED_B_PIN
#define RGB_LED_B_PIN 53 // D7
#endif
#elif ENABLED(FYSETC_MINI_12864_2_1)
#error "Pin compatibility check needed! Grand central M4 pins 50, 51 and 52 are not GPIO pins, they are wired to MISO, MOSI, and SCK."
#define NEOPIXEL_PIN 50 // D5
#endif
#elif ENABLED(MKS_MINI_12864)
#error "Pin compatibility check needed! Grand central M4 pins 50, 51 and 52 are not GPIO pins, they are wired to MISO, MOSI, and SCK."
#define ORIG_BEEPER_PIN 75
#define DOGLCD_A0 52
#define DOGLCD_CS 50
#define SD_DETECT_PIN -1 // 51 can't be used, it's MOSI
#endif
#if ENABLED(NEWPANEL)
#define BTN_EN1 44
#define BTN_EN2 42
#define BTN_ENC 40
#endif
#endif // HAS_SPI_LCD
//
// SD Support
//
#ifndef SDCARD_CONNECTION
#define SDCARD_CONNECTION ONBOARD
#endif
#if SD_CONNECTION_IS(ONBOARD)
#undef SDSS
#define SDSS 83
#undef SD_DETECT_PIN
#define SD_DETECT_PIN 95
#endif

3
README.md
View File

@ -1,4 +1,4 @@
# Marlin 3D Printer Firmware
# Marlin 3D Printer Firmware
[![Build Status](https://travis-ci.org/MarlinFirmware/Marlin.svg?branch=bugfix-2.0.x)](https://travis-ci.org/MarlinFirmware/Marlin)
![GitHub](https://img.shields.io/github/license/marlinfirmware/marlin.svg)
@ -49,6 +49,7 @@ Marlin 2.0 introduces a layer of abstraction so that all the existing high-level
----|---------|-----|-----|----|-----|---
[STEVAL-3DP001V1](http://www.st.com/en/evaluation-tools/steval-3dp001v1.html)|[STM32F401VE Arm-Cortex M4](http://www.st.com/en/microcontrollers/stm32f401ve.html)|84MHz|512k|64+32k|3.3-5V|yes
[Smoothieboard](http://reprap.org/wiki/Smoothieboard)|LPC1769 ARM-Cortex M3|120MHz|512k|64k|3.3-5V|no
[Adafruit Grand Central M4](https://www.adafruit.com/product/4064)|ARM-Cortex M4|120MHz|1M|256k|3.3V|yes
## Submitting Patches

14
buildroot/share/tests/adafruit_grandcentral_m4-tests Normal file
View File

@ -0,0 +1,14 @@
#!/usr/bin/env bash
#
# Build tests for Adafruit Grand Central M4 (ATMEL ARM Cortex-M4)
#
# exit on first failure
set -e
restore_configs
opt_set MOTHERBOARD BOARD_AGCM4_RURAMPS4D_13
exec_test $1 $2 "Build Grand Central M4 Default Configuration"
# clean up
restore_configs

2
config/default/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/AlephObjects/TAZ4/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Alfawise/U20/Configuration_adv.h
View File

@ -1040,7 +1040,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/AliExpress/UM2pExt/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Anet/A2/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Anet/A2plus/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Anet/A6/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Anet/A8/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Anet/A8plus/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Anet/E16/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/AnyCubic/i3/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/ArmEd/Configuration_adv.h
View File

@ -1041,7 +1041,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/BIBO/TouchX/default/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/BQ/Hephestos/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/BQ/Hephestos_2/Configuration_adv.h
View File

@ -1045,7 +1045,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/BQ/WITBOX/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Cartesio/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Creality/CR-10/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Creality/CR-10S/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Creality/CR-10_5S/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Creality/CR-10mini/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Creality/CR-20 Pro/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Creality/CR-20/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Creality/CR-8/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Creality/Ender-2/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Creality/Ender-3/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Creality/Ender-4/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Creality/Ender-5/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Dagoma/Disco Ultimate/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/EVNOVO (Artillery)/Sidewinder X1/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Einstart-S/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/FYSETC/AIO_II/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/FYSETC/Cheetah/BLTouch/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/FYSETC/Cheetah/base/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/FYSETC/F6_13/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Felix/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/FlashForge/CreatorPro/Configuration_adv.h
View File

@ -1036,7 +1036,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/FolgerTech/i3-2020/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Formbot/Raptor/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
View File

@ -1041,7 +1041,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Formbot/T_Rex_3/Configuration_adv.h
View File

@ -1041,7 +1041,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Geeetech/A10/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Geeetech/A10M/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Geeetech/A20M/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Geeetech/MeCreator2/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Infitary/i3-M508/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/JGAurora/A1/Configuration_adv.h
View File

@ -1042,7 +1042,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/JGAurora/A5/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/JGAurora/A5S/Configuration_adv.h
View File

@ -1042,7 +1042,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/MakerParts/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Malyan/M150/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Malyan/M200/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Micromake/C1/enhanced/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Mks/Robin/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Mks/Sbase/Configuration_adv.h
View File

@ -1038,7 +1038,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/RapideLite/RL200/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/RigidBot/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/SCARA/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/STM32/Black_STM32F407VET6/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Sanguinololu/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Tevo/Michelangelo/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Tevo/Tarantula Pro/Configuration_adv.h
View File

@ -1033,7 +1033,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Tevo/Tornado/V1 (MKS Base)/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/Tevo/Tornado/V2 (MKS GEN-L)/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/TheBorg/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

2
config/examples/TinyBoy2/Configuration_adv.h
View File

@ -1037,7 +1037,7 @@
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define BINARY_FILE_TRANSFER
#ifdef TARGET_LPC1768
#if HAS_SDCARD_CONNECTION
/**
* Set this option to one of the following (or the board's defaults apply):
*

Some files were not shown because too many files have changed in this diff Show More